Settings for dynalink rta1046vw

mandj · 06-15-2008, 03:09 AM

Hi,
I have a voxalot prem account.
I have registered both mynetfone and gotalk with voxalot, but have been unable to get registered with my dynalink and voxalot.

These are my settings

SIP Basic Settings

Phone 1: VOIP mode
(The registration is failed. You can not make VOIP phone calls through this port now.)
Phone 2: PSTN mode
(The registration is failed. You can not make VOIP phone calls through this port now.)

Interface: Primary LANpppoe_8_35_1
SIP Transport Protocol: UDP Port: 5060
VoIP Service Provider: Others
SIP Registrar Address: au.voxalot.com Port: 5060
SIP Outbound Proxy: au.voxalot.com Port: 5060
SIP Proxy Server Address: au.voxalot.com Port: 5060

Registration Information

Phone Phone Number Caller Name User Name Password
1 665xxx myname 665xxx XXXXXX

emoci · 06-16-2008, 10:29 PM

The setup above looks coorrect....

I would ensure that the au cluster is selected when logged into VoXalot...

If the problem persists try using us.voxalot.com or eu.voxalot.com and see if anything changes...

Also have you been able to use your Dynalink ATA with any other Voip Providers, except VoXalot?

06-15-2008, 03:09 AM	#1
mandj Junior Member Join Date: Jun 2008 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Settings for dynalink rta1046vw Hi, I have a voxalot prem account. I have registered both mynetfone and gotalk with voxalot, but have been unable to get registered with my dynalink and voxalot. These are my settings SIP Basic Settings Phone 1: VOIP mode (The registration is failed. You can not make VOIP phone calls through this port now.) Phone 2: PSTN mode (The registration is failed. You can not make VOIP phone calls through this port now.) Interface: Primary LANpppoe_8_35_1 SIP Transport Protocol: UDP Port: 5060 VoIP Service Provider: Others SIP Registrar Address: au.voxalot.com Port: 5060 SIP Outbound Proxy: au.voxalot.com Port: 5060 SIP Proxy Server Address: au.voxalot.com Port: 5060 Registration Information Phone Phone Number Caller Name User Name Password 1 665xxx myname 665xxx XXXXXX

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dynalink rta1046vw and Voxalot	dazz1975	Voxalot Support	3	06-14-2008 07:27 AM
net2phone settings reqd for voxalot	725252	Voxalot Support	4	05-28-2008 06:31 PM
VoXalot provider settings Budgetphone.nl and Voipbuster.com	ruudsje	Voxalot Support	15	02-05-2008 01:00 PM
backup all settings	mbworks	Voxalot Support	0	02-18-2007 03:51 AM
Settings you use for your phone.	alfredwesterveld	Voxalot Support	3	04-01-2006 10:15 PM

06-16-2008, 10:29 PM	#2
emoci Join Date: Jul 2007 Location: Toronto, Canada Posts: 1,422 Thanks: 123 Thanked 369 Times in 282 Posts	The setup above looks coorrect.... I would ensure that the au cluster is selected when logged into VoXalot... If the problem persists try using us.voxalot.com or eu.voxalot.com and see if anything changes... Also have you been able to use your Dynalink ATA with any other Voip Providers, except VoXalot?