|
Voxalot Support Support for the Voxalot service. |
Thread Tools | Display Modes |
08-15-2009, 12:14 AM | #1 |
Member
Join Date: Sep 2006
Location: Canada
Posts: 67
Thanks: 7 Thanked 0 Times in 0 Posts |
inbound calls do not ring ATA, but go to voicemail
Hello,
I just created a new free Voxalot account 'my_user_id'. I am forwarding Callcentric calls at my voxalot sip uri 'my_user_id@us.voxalot.com'. My ATA SPA2102 does not ring, instead the calls go to voxalot's voicemail. My ATA is registerd with voxalot and I do not have any problems with outgoing calls. My ATA has only G729a codec enabled |
08-15-2009, 12:46 AM | #2 |
Member
Join Date: Feb 2009
Posts: 33
Thanks: 5 Thanked 0 Times in 0 Posts |
Hi Everyone,
I do have the same problem as mentioned above i.e whenever a voxalot user tries to call my voxalot extension his call is getting diverted to the voicemail and he cannot reach my phone,on contrary whenever i dial other voxalot the connection is made with any issues I am using a siemens C475 IP DECT phone. Looking forward to any pointers on the issue. Thanks |
08-15-2009, 02:41 AM | #3 |
Senior Member
Join Date: Jul 2007
Location: Oregon, USA
Posts: 365
Thanks: 17 Thanked 77 Times in 64 Posts |
The problem could be a 'NAT keep alive' issue. If your ATA is behind a NAT router and the SIP port is not forwarded then the ATA must send SIP packets at regular intervals in order to maintain a NAT mapping in the router. The NAT mapping allows incoming SIP packets to reach the ATA. If the 'NAT keep alive' packets are not sent the router will remove the NAT mapping after some time, usually 3 or 5 minutes. If you can receive calls immediately after your ATA has registered, but a few minutes later the calls go to voice mail, that indicates a 'NAT keep alive' issue.
To test; power cycle or reboot your ATA so you know it has just registered. As soon as it has dial tone or otherwise indicates successful registration, do something to ring your Voxalot number. If your Voxalot phone can receive calls only during a short time after SIP registration then you may have a 'NAT keep alive' issue. If your phone does not ring, even when called within the first 60 seconds after registration, then we need to consider other possible causes of the problem. Last edited by boatman; 08-16-2009 at 07:17 PM. |
08-15-2009, 03:29 AM | #4 |
Member
Join Date: Sep 2006
Location: Canada
Posts: 67
Thanks: 7 Thanked 0 Times in 0 Posts |
My ATA has a public (dynamic) IP addres, so there should not be NAT issues, correct?
I have copied all the SIP and codec settings as in the voxalot's faq/tutorial for SPA3102 (including setting SIP port to 5060 and G711u as Preferred Codec). Also I tried to call my ATA via Sipbroker PSTN assess number and get the same result: my ATA does not ring and calls go to voicemail. So it has nothing to do with Callcentric. The problem is clearly between my ATA (SPA2102) and Voxalot. RESOLVED Last edited by rybshik; 08-15-2009 at 05:18 AM. Reason: UPDATE |
08-15-2009, 05:21 AM | #5 | |
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts |
Quote:
|
|
08-16-2009, 06:38 PM | #6 |
Junior Member
Join Date: Feb 2009
Posts: 28
Thanks: 3 Thanked 2 Times in 2 Posts |
I have had the same problem this weekend. I was on eu proxy one server (Due to FUP problem). Inbound calls going to voicemail. Changed to US server and received inbound calls. Later on Saturday I changed back to EU proxy one and received inbound calls again. Untill late Sunday when I noticed the problem again. Have changed to US server and receiving incoming again.
|
08-16-2009, 07:21 PM | #7 |
Senior Member
Join Date: Jul 2007
Location: Oregon, USA
Posts: 365
Thanks: 17 Thanked 77 Times in 64 Posts |
|
09-24-2009, 03:14 AM | #8 |
Junior Member
Join Date: Sep 2009
Posts: 3
Thanks: 0 Thanked 0 Times in 0 Posts |
Patton Micro ATA
I can get X-Lite Softphone to work with Voxalot. Unable to get ATA to work with Voxalot. ATA is registered with Voxalot. Call SIP Number for ATA and only getting Voicemail. Phone does not ring but it does have a dial tone. What am I missing?
Last edited by jcbrown; 09-24-2009 at 03:16 AM. |
09-24-2009, 04:10 AM | #9 |
Junior Member
Join Date: Dec 2007
Posts: 6
Thanks: 0 Thanked 0 Times in 0 Posts |
Cannot register my v100 to voxalot was working for years registers when I change to M
Cannot register my v100 to voxalot was working for years registers when I change to MNF but no success on the ATA with Voxalot ( is registering on x-lite softphone ? Any problems at voxalot ? any solution
Ta Jak |
09-24-2009, 04:13 AM | #10 |
Senior Member
Join Date: Jul 2007
Location: Oregon, USA
Posts: 365
Thanks: 17 Thanked 77 Times in 64 Posts |
Maybe it's a NAT traversal issue. Can you receive a call within the first 180 seconds after SIP registration? If so, try forwarding the SIP port used on your end, and use a STUN server.
Last edited by boatman; 09-24-2009 at 04:18 AM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Free DID Numbers, Free Voip Calls, & more Voip Info | amroe | Voxalot General | 54 | 01-13-2014 09:11 AM |
incoming sip calls going directly to voicemail | vishal3110 | Voxalot Support | 8 | 12-13-2008 12:17 AM |
Vitelity Inbound Calls go to voice mail | BigTex | Voxalot Support | 5 | 10-26-2007 11:50 PM |
Some Calls Never Ring Go Straight to VM | glh003 | Voxalot Support | 1 | 07-03-2007 07:21 PM |
Newbie - but please be nice | Mallycat | Voxalot Support | 21 | 04-15-2006 07:50 AM |