No dialtone on free account

hobnob · 09-21-2008, 01:20 AM

Hi -

Appreciate any help in advance

I'm looking to arrange the standard voxalot setup for myself: betamax for outgoing and DID from another provider for incoming.

I have correctly registered my ATA with voxalot, according to the ATA status page. However, I do not have a dial tone. It's a Vonage-unlocked PAP2v2.

Am I correct in thinking that I need a voxlite account (the $15/year one) ? Or is there a technical problem I have yet to identify?

boatman · 09-21-2008, 03:33 AM

The ATA should have dial tone whenever it's registered on a SIP proxy, you don't need a paid Voxalot account to get dial tone.

The problem with the PAP2v2 is that no good documentation is available for it. Firmware and settings are somewhat different than other Linksys ATAs.

green · 09-21-2008, 09:57 AM

I don't think your problem is related to voxalot.
If you are using the only one line on PAP2v2 try to configure your account on line 2 only.

hobnob · 09-21-2008, 07:09 PM

I have tried both lines. I can register with MSS and directly with betamax to make outgoing calls (and receive incoming on MSS).

Yeah, the PAP2v2 is a fickle bitch. Maybe it's time to buy another.

hobnob · 09-23-2008, 12:43 AM

I suspect that my ATA *requires* an SIP registration to work - is there anyone to get a "test" account - would only need it for 5 minutes to make sure my theory is correct!

emoci · 09-23-2008, 09:35 PM

Quote:

Originally Posted by hobnob

I suspect that my ATA *requires* an SIP registration to work - is there anyone to get a "test" account - would only need it for 5 minutes to make sure my theory is correct!

You do not need a VoXPremium acct. to register your ATA with VoXalot....

VoXPremium only deals with registration between VoXalot and other providers (and this only if these other providers require to be registered rather than offering SIP Forwarding)...

hobnob · 09-29-2008, 07:54 PM

** UPDATE ***

I bought a new ATA today. Just for kicks, tested the old PAP2v2. It decides to register with voxalot and provide dial tone.

Brilliant! Hope the shop takes refunds!

09-21-2008, 01:20 AM	#1
hobnob Junior Member Join Date: Sep 2008 Posts: 6 Thanks: 0 Thanked 2 Times in 1 Posts	No dialtone on free account Hi - Appreciate any help in advance I'm looking to arrange the standard voxalot setup for myself: betamax for outgoing and DID from another provider for incoming. I have correctly registered my ATA with voxalot, according to the ATA status page. However, I do not have a dial tone. It's a Vonage-unlocked PAP2v2. Am I correct in thinking that I need a voxlite account (the $15/year one) ? Or is there a technical problem I have yet to identify?

09-21-2008, 09:57 AM	#3
green Senior Member Join Date: Jul 2007 Posts: 143 Thanks: 13 Thanked 20 Times in 19 Posts	I don't think your problem is related to voxalot. If you are using the only one line on PAP2v2 try to configure your account on line 2 only. Last edited by green; 09-21-2008 at 10:42 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Free DID Numbers, Free Voip Calls, & more Voip Info	amroe	Voxalot General	54	01-13-2014 09:11 AM
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough	ctylor	Voxalot General	5	04-28-2010 12:52 AM
Virtual Toll Free with basic account?	gowgowuk	Voxalot Support	2	02-23-2008 10:48 AM

09-21-2008, 03:33 AM	#2
boatman Senior Member Join Date: Jul 2007 Location: Oregon, USA Posts: 365 Thanks: 17 Thanked 77 Times in 64 Posts	The ATA should have dial tone whenever it's registered on a SIP proxy, you don't need a paid Voxalot account to get dial tone. The problem with the PAP2v2 is that no good documentation is available for it. Firmware and settings are somewhat different than other Linksys ATAs.

09-21-2008, 07:09 PM	#4
hobnob Junior Member Join Date: Sep 2008 Posts: 6 Thanks: 0 Thanked 2 Times in 1 Posts	I have tried both lines. I can register with MSS and directly with betamax to make outgoing calls (and receive incoming on MSS). Yeah, the PAP2v2 is a fickle bitch. Maybe it's time to buy another.

09-23-2008, 12:43 AM	#5
hobnob Junior Member Join Date: Sep 2008 Posts: 6 Thanks: 0 Thanked 2 Times in 1 Posts	I suspect that my ATA requires an SIP registration to work - is there anyone to get a "test" account - would only need it for 5 minutes to make sure my theory is correct!

09-29-2008, 07:54 PM	#7
hobnob Junior Member Join Date: Sep 2008 Posts: 6 Thanks: 0 Thanked 2 Times in 1 Posts	UPDATE * I bought a new ATA today. Just for kicks, tested the old PAP2v2. It decides to register with voxalot and provide dial tone. Brilliant! Hope the shop takes refunds!