![]() |
|
Voxalot Support Support for the Voxalot service. |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Jul 2006
Posts: 5
Thanks: 0 Thanked 0 Times in 0 Posts ![]() |
![]() Is there a way to add pause of x seconds in my webcallback number.
I get a dialtone, but I would need to wait a few seconds until the connection is established, and then continue dialing. I can easily do that with my spa-3000, but not with the voxalot that I use from work. Thanks, SMico |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Jul 2006
Posts: 5
Thanks: 0 Thanked 0 Times in 0 Posts ![]() |
![]() Am I asking question that has been asked many times before? I couldn't find it searching the forum??? Is this improvement on the wish list, I couldn't find it somehow.
So, just reiterate, I have an automated switchboard in my company, and I need to get through it: 1. Using webcallback call the switchboard 2. wait let's say 5 seconds until connection is set 3. dial my extension Any clues? Or I will finally have to setup easypabx... Thanks |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() |
![]() I would like to know if this is possible as well. It would be a good feature, for example to dial the PIN code of my voicemail after the call is answered, not right away.
Last edited by tomblandford; 01-11-2007 at 08:14 AM. |
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Jul 2007
Posts: 7
Thanks: 1 Thanked 0 Times in 0 Posts ![]() |
![]() I would also like a pause so I can use my dial plan to use 0800Buster
0800Buster.co.uk: Call 0800, 0808 & 0500 Numbers Free From Your Mobile This is a section out of their instructions "Most mobiles come with the ability to add “pauses” to contacts which cause the phone to wait for 2–3 seconds before dialling the rest of the number. These are usually represented by a “p” or “+” so the number you store should resemble 01250820800p0800123456#. To enter a pause" I would think that this sort of delay could be easily implemented in voxalot |
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Apr 2006
Location: UK
Posts: 218
Thanks: 34 Thanked 22 Times in 19 Posts ![]() |
![]() |
![]() |
![]() |
![]() |
#6 |
Junior Member
Join Date: Jul 2007
Posts: 7
Thanks: 1 Thanked 0 Times in 0 Posts ![]() |
![]() Basically because I have not found a provider yet in the UK that gives free 0800 numbers
|
![]() |
![]() |
![]() |
#7 | |
![]() Join Date: Apr 2006
Location: UK
Posts: 218
Thanks: 34 Thanked 22 Times in 19 Posts ![]() |
![]() Quote:
2 I knew, plus 3 guesses, and I haven't found one that says it does charge Justvoip doesn't need its so-called Freedays as the tariff is actually zero [true last time I tried, a month ago], and it's just possible it doesn't need credit in the account either |
|
![]() |
![]() |
![]() |
#8 |
Junior Member
Join Date: Jul 2010
Posts: 11
Thanks: 9 Thanked 0 Times in 0 Posts ![]() |
![]() The question is still interesting though: "how to program pauses".
This for instance that could give possibilities for often chosen numbers, to preset the list of DTMF tones to: - access your voice mail - dial thru till the request extension - hear your account balance in the correct language etcetera |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Post Your VoXaLot Dial Plan | martin | Voxalot General | 45 | 07-24-2009 07:02 PM |