09-20-2006, 04:25 PM | #1 |
Junior Member
Join Date: Sep 2006
Posts: 5
Thanks: 0 Thanked 0 Times in 0 Posts |
401 Unauthorized
I have a Cisco 7960 running 8.4 code and I am able to dial 600 for the echo test.
My problem is, in sniffer traces I see that I am constantly sending SIP Register requests and the return response is 401 Unauthorized. In between I see that I am sending an ICMP Port Unreachable packet indicating Source port 5060 and Destination port 50434. I have two FWD accounts on the first two lines which register fine. Can anyone help with this? Thanks, Tom Last edited by trhoads; 09-20-2006 at 04:35 PM. |
09-20-2006, 10:07 PM | #2 |
Join Date: Feb 2006
Posts: 2,930
Thanks: 528 Thanked 646 Times in 340 Posts |
Hi,
I am presuming you are defining your settings in the SIPxxxxxxx.cnf file and using tftp boot? If so, what do you have in the: linex_authname field? Have you tried a fully qualified username. i.e. xxxxxx@voxalot.com
__________________
Martin Please post support questions on the forum. Do not send PMs unless requested. |
09-21-2006, 02:29 PM | #3 |
Junior Member
Join Date: Sep 2006
Posts: 5
Thanks: 0 Thanked 0 Times in 0 Posts |
Yes, I am using the SIPxxxxxxxx.cnf file. The config comes down fine with TFTP and lines 1 & 2 which register to FWD work fine.
proxy3_address: "voxalot.com" proxy3_port: "5060" line3_name : "517919" line3_authname : "517919@voxalot.com" line3_password : "XXX" line3_shortname : "VoXaLoT" line4_displayname : "517919" Thanks, Tom |
09-21-2006, 10:12 PM | #4 |
Join Date: Feb 2006
Posts: 2,930
Thanks: 528 Thanked 646 Times in 340 Posts |
Hi Tom,
Have you tried just: line3_authname : "517919"
__________________
Martin Please post support questions on the forum. Do not send PMs unless requested. |
09-21-2006, 10:38 PM | #5 |
Junior Member
Join Date: Sep 2006
Posts: 5
Thanks: 0 Thanked 0 Times in 0 Posts |
Yes, I have tried that as well.
Thanks. |