PSTN gateway codec order

[green]

Currently when I dial PSTN access number Sipbroker gateway will setup a call with the following codec order:

RTP/AVP 0 18 8 111 97 3 4 101

a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:8 PCMA/8000
a=rtpmap:111 G726-32/8000
a=rtpmap:97 iLBC/8000
a=rtpmap:3 GSM/8000
a=rtpmap:4 G723/8000

It will be more logical to make it looking like 0 8 18 111 97 3 4 101,
i.e. puth both PCM codecs first and lower bandwidth codecs after.

This is my real problem. I'm dialing my home VSP using the SIP-code. The SIP account with my home VSP is forwarded permanently to the local PSTN number. As soon as PCMU is not supported by my VSP the call is established with G.729 (according to Sipbroker's preference) while I need G.711A!

Thanks!