Voxalot to BroadVoice

Cyberian75 · 09-04-2006, 09:54 PM

Is Call Forwarding to BV working?

I put "sip:number@sip.broadvoice.com" as the default, but it doesn't seem to be working.

Thanks.

Cyberian75 · 09-05-2006, 02:37 AM

FWD to BV (**282) Peering works fine, so the problem appears to be with Voxalot's voicemail. It answers the calls instead of forwarding to my BV number.

ctylor · 09-05-2006, 03:18 AM

What if you try sip broker via FWD to get to Broadvoice?

Try this as the target sip address and see if it works:
*393**282number@sipbroker.com

forwarding it to:
**282number@fwd.pulver.com
would also accomplish the same thing, but hey it just might work.

Case in point, there is no direct way to phone IP to IP a packet8 user, yet one can go through FWD (or Sip Broker then to FWD) to ring up your packet8 friend.

klydal · 09-05-2006, 09:17 AM

you used to be able to use **282(bvnumber)@fwd.pulver.com as an open sip. *393**282(bvnumber) also worked too. However, it seems that BV has restricted access to sip calling. It looks like they will now only accept calls that originate from FWD and not from outside. So basically you have to be logged in to FWD either with the communicator program or with your ATA in order to call a BV custormer. Check out this post on FWD's forum:

http://www.freeworlddialup.com/commu...pic.php?t=4679

Cyberian75 · 09-05-2006, 09:22 PM

Thanks, I'm gonna try the direct IP calling method as I've a SPA3K.

09-04-2006, 09:54 PM	#1
Cyberian75 Member Join Date: Sep 2006 Posts: 36 Thanks: 7 Thanked 0 Times in 0 Posts	Voxalot to BroadVoice Is Call Forwarding to BV working? I put "sip:number@sip.broadvoice.com" as the default, but it doesn't seem to be working. Thanks.

09-05-2006, 03:18 AM	#3
ctylor Join Date: Apr 2006 Location: Vancouver, BC Posts: 296 Thanks: 94 Thanked 53 Times in 27 Posts	What if you try sip broker via FWD to get to Broadvoice? Try this as the target sip address and see if it works: 393282number@sipbroker.com forwarding it to: 282number@fwd.pulver.com would also accomplish the same thing, but hey it just might work. Case in point, there is no direct way to phone IP to IP a packet8 user, yet one can go through FWD (or Sip Broker then to FWD) to ring up your packet8 friend. Last edited by ctylor; 09-05-2006 at 03:23 AM.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough	ctylor	Voxalot General	5	04-28-2010 12:52 AM
SPA to Voxalot REDIRects?	Tslam	Voxalot Support	12	11-17-2009 08:25 PM
Can't get voice packets to bypass VoXaLot	v164	Voxalot Support	35	08-23-2009 10:25 PM
VoXaLot not working with PBXes (VoXaLot as an extension of PBXes)	wilsonhlacerda	Voxalot Support	31	12-09-2007 02:30 PM
Which VoXaLot services are B2BUA?	v164	Voxalot Support	6	07-23-2007 01:48 PM

09-05-2006, 02:37 AM	#2
Cyberian75 Member Join Date: Sep 2006 Posts: 36 Thanks: 7 Thanked 0 Times in 0 Posts	FWD to BV (**282) Peering works fine, so the problem appears to be with Voxalot's voicemail. It answers the calls instead of forwarding to my BV number.

09-05-2006, 09:17 AM	#4
klydal Junior Member Join Date: Jul 2006 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	you used to be able to use *282(bvnumber)@fwd.pulver.com as an open sip. 393**282(bvnumber) also worked too. However, it seems that BV has restricted access to sip calling. It looks like they will now only accept calls that originate from FWD and not from outside. So basically you have to be logged in to FWD either with the communicator program or with your ATA in order to call a BV custormer. Check out this post on FWD's forum: http://www.freeworlddialup.com/commu...pic.php?t=4679

09-05-2006, 09:22 PM	#5
Cyberian75 Member Join Date: Sep 2006 Posts: 36 Thanks: 7 Thanked 0 Times in 0 Posts	Thanks, I'm gonna try the direct IP calling method as I've a SPA3K.