Billion Enum Sipbroker lookup to pennytel.

[heatray]

I have a PSTN failover option "Enable when receive specific SIP codes" under advanced settings. What would be the SIP code returned by SIPBroker for the failed ENUM lookup?

If this is something specific, then I can code fallback for this code only. Then I just need to determine if I can pass this to my voip dialplan for calling via Pennytel? As I have no specific PSTN dial plan, but have catered for it in my VOIP dial plan.

If I can I want to not reply of having a P.C. running to make any calls. VOXALOT could be an option..

Is it a costing service, as I'm already paying for two VSP's... No, Three..

Can it allow me to rank VSP's and have VSP fallback? Say if VSP1 fails, direct calls via VSP2?

Cheers HEATH

[evilbunny]

Originally Posted by heatray

I have a PSTN failover option "Enable when receive specific SIP codes" under advanced settings. What would be the SIP code returned by SIPBroker for the failed ENUM lookup?

I assume it would be a 3xx message, meaning it's not a fail but you are being sent a temporary redirect instead back to pennytel or what not.

Is it a costing service, as I'm already paying for two VSP's... No, Three..

Can it allow me to rank VSP's and have VSP fallback? Say if VSP1 fails, direct calls via VSP2?

It varies depending on what you want features wise, from free to some annual amount per year. Voxalot - Services

[heatray]

Originally Posted by evilbunny

I assume it would be a 3xx message, meaning it's not a fail but you are being sent a temporary redirect instead back to pennytel or what not.[/url]

Is there any way to tell which 3xx codes, so that I can cater for this in my failover rules? It's not obvious looking at the Billion Console log.

It varies depending on what you want features wise, from free to some annual amount per year. Voxalot - Services

I'd want to be able to specify my two main VSP's, with the ENUM usage. Is it possible to only use Voxalot for outbound calls and have the same VSP's registered to my device, to have the extra hops for inbound calls?

Thanks for your time.

HEATH

[evilbunny]

Originally Posted by heatray

Is there any way to tell which 3xx codes, so that I can cater for this in my failover rules? It's not obvious looking at the Billion Console log.

If in doubt packet dump, well it works for me

failing that...

I'd want to be able to specify my two main VSP's, with the ENUM usage. Is it possible to only use Voxalot for outbound calls and have the same VSP's registered to my device, to have the extra hops for inbound calls?

I think so, sign up for the free account and try it, other then time what do you have to loose?

[heatray]

Originally Posted by evilbunny

If in doubt packet dump, well it works for me

OK. So what is a "packet dump"? I guess its to do with the data being sent between devices, but how and where do I perform it?

Voxalot is another option altogether.... I'd then have to get my head around a whole pile of new dialplans....

HEATH

[evilbunny]

Originally Posted by heatray

OK. So what is a "packet dump"? I guess its to do with the data being sent between devices, but how and where do I perform it?

Go look up wireshark.

[heatray]

OK, Got wireshark to perform the packet dump, and the used the TELNET via console cable to capture the Console Enable and event show info...

But wireshark will not recognize the TELNET LOG file as valid. Does anyone have some ideas about how these bits fit together?

Do I need to setup SNMP on and send info to SNMP SYSLOG server on my P.C.?

Any help appreciated...

HEATH