Voxalot as Provider in Dial Plan

vpsaini · 06-26-2006, 04:29 PM

Hi, This is a problem with my ATA. I have setup a dial plan like 00xx. in the ATA dial plan and hence can not dial a number like 500 or *010... via Voxalot. Now my home PC is down and I can not configure the ATA. I feel this may be a problem with many who may not have PC access many times. Now I wanted to setup a dial plan in Voxalot dial plans at office. But I found that I can not chose Voxalot as provider in the dial plans.. I feel if voxalot can also be added as provider in the dial plans, than there will be no need to configure ATA at any moment..
Regards
Vishnu

moollar · 06-27-2006, 12:29 AM

Quote:

Originally Posted by vpsaini

Hi, This is a problem with my ATA. I have setup a dial plan like 00xx. in the ATA dial plan and hence can not dial a number like 500 or *010... via Voxalot. Now my home PC is down and I can not configure the ATA. I feel this may be a problem with many who may not have PC access many times. Now I wanted to setup a dial plan in Voxalot dial plans at office. But I found that I can not chose Voxalot as provider in the dial plans.. I feel if voxalot can also be added as provider in the dial plans, than there will be no need to configure ATA at any moment..
Regards
Vishnu

Hi Vishnu,
What ATA are you using? If you want to just use VoXaLot to do all the dialplan work and not your ATA, then the best way of doing things is to have a "catch all" dialplan in your ATA, then you can just modify your VoXaLot dialplan from anywhere you can access the internet (assuming you have your ATA registered with VoXaLot and don't just have VoXaLot as a gateway). If 00xx. is the only dialplan rule in your ATA, then only calls starting with a 00 will get through to VoXaLot. Nothing else will work. A "catch all" will be something like x. or xxx. etc.

vpsaini · 06-27-2006, 09:36 AM

Hi Moollar,
Thanks for your quick reply. I am using Linksys PAP2. I had configured it long back to Voipbuster and when started using Voxalot , I left the dial plan as it is which starts with 00 . At the moment I can not configure ATA. So I was just wondering if I could add Voxalot as provider. In any case I will configure ATA dial plan to "catch all".

Thanks and Regards
Vishnu

06-26-2006, 04:29 PM	#1
vpsaini Junior Member Join Date: Jun 2006 Posts: 18 Thanks: 0 Thanked 0 Times in 0 Posts	Voxalot as Provider in Dial Plan Hi, This is a problem with my ATA. I have setup a dial plan like 00xx. in the ATA dial plan and hence can not dial a number like 500 or *010... via Voxalot. Now my home PC is down and I can not configure the ATA. I feel this may be a problem with many who may not have PC access many times. Now I wanted to setup a dial plan in Voxalot dial plans at office. But I found that I can not chose Voxalot as provider in the dial plans.. I feel if voxalot can also be added as provider in the dial plans, than there will be no need to configure ATA at any moment.. Regards Vishnu

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough	ctylor	Voxalot General	5	04-28-2010 12:52 AM
SPA3000 Dial Plan where Voxalot as a gateway	peters	Voxalot Support	4	05-08-2007 01:40 PM
Dial plan problems with FaktorTel and VoXaLoT	Hally	Voxalot Support	1	01-06-2007 09:21 AM
Default Voxalot Dial Plan	Bazza	Voxalot Support	5	06-07-2006 12:50 PM
voxalot dial plan	yaman	Voxalot Support	8	04-22-2006 09:52 AM

06-27-2006, 09:36 AM	#3
vpsaini Junior Member Join Date: Jun 2006 Posts: 18 Thanks: 0 Thanked 0 Times in 0 Posts	Hi Moollar, Thanks for your quick reply. I am using Linksys PAP2. I had configured it long back to Voipbuster and when started using Voxalot , I left the dial plan as it is which starts with 00 . At the moment I can not configure ATA. So I was just wondering if I could add Voxalot as provider. In any case I will configure ATA dial plan to "catch all". Thanks and Regards Vishnu