![]() |
|
Voxalot General Voxalot discussion, tips, tricks and suggestions. Talk about them here. |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Jul 2009
Posts: 3
Thanks: 1 Thanked 0 Times in 0 Posts ![]() |
![]() Hi Folks,
What I'm looking to do is make international calls at untimed rates without a 'web callback'. I have an Australian-based VoIP provider and intend on getting a series of 'local' providers in overseas land and hope to use Voxalot to connect the two local calls together. Effectively, I simply want to make a phone call from a handset connected to an ATA and have the call connected immediately. Is this a possibility? Thanks, Wakie. |
![]() |
![]() |
![]() |
#2 | |
![]() ![]() Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts ![]() ![]() ![]() ![]() |
![]() Quote:
VoXalot is a service that stands in middle and routes Incoming and Outgoing calls based on your preferences ... However incoming and outgoing services from and to the PSTN must be obtained from third party providers. If you want to set up something a-la Rebtel Smart Call or Talkster ...Web-Call-Back is probably as close as it gets... I could of course be missing part of what you wish to do....if you could describe an example call and how you'd like it to proceed maybe we can provide some better pointers... |
|
![]() |
![]() |
![]() |
#3 |
Junior Member
Join Date: Jul 2009
Posts: 3
Thanks: 1 Thanked 0 Times in 0 Posts ![]() |
![]() Hi emoci,
Just say I want to call a relation in Turkey from Australia, I would get a local VoIP provider in Australia and a provider in Turkey - joining the calls together via Voxalot to effectively give me an untimed phone call. I've noticed this is possible via a callback type of system, but I was hoping that it was more instant. I'd like to make the call and have it connect immediately. Any advice would be great, thanks. Wakie. |
![]() |
![]() |
![]() |
#4 | |
![]() ![]() Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts ![]() ![]() ![]() ![]() |
![]() Quote:
-If you use your Australian based Voip Provider (most of them) to call Turkey you'll be charged a per minute fee... If what you mean is this: -Find a provider that offers unlimited calls in Australia -Find a provider that offers unlimited calls in Turkey -Somehow connect these providers so you can call two locations in Turkey and Australia Then ...the solution is simple...as long as you're using VoXalot from an ATA device or SoftPhone connected to the internet, you can call to Turkey using the Unlimited Turkey provider and you can call to Australia using the Unlimited Australia provider (there is no need to join them). If you want to place the call from a regular landline or mobile instead, then your choices are Web Call Back, a CallBack setup (see LiberaIlVoip) or a CallThru setup (see PBXes.com) As you see I'm still not 100% clear on what you're trying to accomplish ... so feel free to reply letting me know if this helped... |
|
![]() |
![]() |
![]() |
#5 | |
Junior Member
Join Date: Jul 2009
Posts: 3
Thanks: 1 Thanked 0 Times in 0 Posts ![]() |
![]() Quote:
![]() So, after I have added my two VoIP providers (Australia and Turkey, both charged at 'local' rates) into my Voxalot account, I'm able to call my Turkish destination via an ATA device programmed to Voxalot? Wouldn't there need to be a Vox POP in Turkey to enable that leg of the call to be charged at a local call rate? |
|
![]() |
![]() |
![]() |
#6 | |
![]() ![]() Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts ![]() ![]() ![]() ![]() |
![]() Quote:
The 2 call legs are: 1. ATA---VoXalot---Turkish Provider (completely over the internet) 2. Turkish Provider ---- PSTN in Turkey (over the actual phone network for which a charge applies...in this case a local charge) If all you wanted to deal with was the Turkish Provider...you could do this directly from your ATA (no VoXalot involved). Where VoXalot comes in handy is if you have a few of these (eg. one for local calls to turkey, one for local calls to germany, one to italy, one for australia....you get the picture) then VoXalot acts as the central place where all the details are stored whereas your ATA only deals with VoXalot... Hope that makes sense... |
|
![]() |
![]() |
![]() |
Tags |
calls, international, untimed |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Free DID Numbers, Free Voip Calls, & more Voip Info | amroe | Voxalot General | 54 | 01-13-2014 09:11 AM |
Some incoming SIP URI dialed calls slient | Tylo | Voxalot Support | 9 | 04-09-2008 05:24 PM |
VoIP situation in Japan - how to improve with ENUM and peering. | v164 | Voxalot General | 2 | 02-02-2008 03:05 PM |
Frredigits: Unable to make International Calls | 244751 | Voxalot Support | 0 | 02-28-2007 12:21 PM |
Untimed International Calls? How? | Mallycat | Voxalot Support | 9 | 05-04-2006 03:54 AM |