|
04-17-2007, 03:01 PM | #1 |
Member
Join Date: Feb 2007
Posts: 63
Thanks: 18 Thanked 4 Times in 4 Posts |
Agree with Kurun, there should be no legal issues.
My number is verified, and as I said, when calling with the voipcheap client my chosen number is displayed. I don't understand why that same number can not be displayed when calling through an ATA. |
04-17-2007, 08:54 PM | #2 |
Member
Join Date: Dec 2006
Location: Canada
Posts: 88
Thanks: 2 Thanked 10 Times in 5 Posts |
My callerID works though voxalot. To get it to work I put the verified number in the user field in my voxalot setting. You can access the user field by clicking going into advanced mode for the provider. Don't know if it matters but I use the format 00+country code+number. Hope this helps
|
04-17-2007, 09:14 PM | #3 |
Member
Join Date: Apr 2007
Location: Vienna, Austria
Posts: 56
Thanks: 5 Thanked 4 Times in 4 Posts |
have to try it!!!
found the following how to about setting the caller id with betamax and sip devices.: "by sending the CALLERID(number) [on Asterisk] the wanted number oder more registered numbers be send. the field CALLERID(name) has to have an random value. if the field CALLERID(name) is not set the number will be suppressed (CLIR)" hope its understandable, i had it to translate it from german. for example on sipura 2000 hardware the configuration is as follows: "Use AuthID" set to "yes" Auth ID: Username User ID: caller id number a lot of people is reporting only formating 0043XXXXX not +43XXXXX is working as caller id. Last edited by haifischjunge; 04-17-2007 at 09:15 PM. Reason: formating |
04-18-2007, 01:56 AM | #4 | |
Member
Join Date: Feb 2007
Posts: 63
Thanks: 18 Thanked 4 Times in 4 Posts |
Quote:
It now works! In summary for others, in the provider details, click advanced, and enter the full number, as said by the user above, the full verified number, and I also used 00+country code+number. Job done! |
|
04-18-2007, 05:55 AM | #5 |
Member
Join Date: Apr 2007
Location: Vienna, Austria
Posts: 56
Thanks: 5 Thanked 4 Times in 4 Posts |
hmm very funny, my cellphones (in austria) are showing an anonymous caller no matter what.
|
04-18-2007, 06:53 AM | #6 |
Member
Join Date: Apr 2007
Location: Vienna, Austria
Posts: 56
Thanks: 5 Thanked 4 Times in 4 Posts |
hi, just tried it with the poivy client, caller id works like a charm.
tried it a few seconds later with voxalot, again just anoymous caller. ive entered the phonenumber in the "from user" field in the advanced settings. do i have perhaps to change the display name on my allnet 7950 sip phone (no display name set at the moment)? however as i understood the settings on the phone are only for connecting to voxalot not handling the outbound call. |
04-18-2007, 08:14 AM | #7 |
Member
Join Date: Dec 2006
Location: Canada
Posts: 88
Thanks: 2 Thanked 10 Times in 5 Posts |
I use a sipura and the display name on my sipura also has my number. Try it and see if it works for you.
|
04-18-2007, 08:29 AM | #8 |
Member
Join Date: Apr 2007
Location: Vienna, Austria
Posts: 56
Thanks: 5 Thanked 4 Times in 4 Posts |
so no ive tried it with a softphone (xmeeting) and its obviouly an issue with the allnet 7950.
if i dont set the display name in xmeeting its an anonymous call. if it is set the anything the right caller id is sent. unfortunately im not at home and i know that the display name is not set right now, however im quite sure ive set it in one of my tries. ill try it tonight when im home. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Caller ID at Voxalot | amroe | Voxalot Support | 8 | 09-13-2007 04:58 PM |
Caller ID no longer working on VPAD ATA | Kars | Voxalot Support | 5 | 02-02-2007 09:21 PM |
Caller can hear me clearly, but I cannot hear the caller | jptg5Y | Voxalot Support | 0 | 01-21-2007 11:52 PM |
Caller id block ? | shezad | Voxalot Support | 2 | 10-27-2006 08:59 PM |
Any one knows why my caller id is always "blah" | yuzyin | Voxalot Support | 1 | 07-09-2006 11:41 AM |