Call forwarding question

751177 · 10-02-2006, 04:37 AM

Hello,

I have a Sipura 3000 and I am registered with Nodephone.

I've set up the Siputa such that direct inbound phone calls work (tested)

Given that Nodephone doesn's support DID I was thinking that I could use VoXaLoT Call forwarding such that any calls to <mynumber>@voxalot.com.au get automatically redirected to the <mynodephonenumber>@internode.on.net
(using the "default" option)

However when I try to call all I get is a busy tone

Any hint much appreciated.

Many thanks.

Cheers.

Ron · 10-02-2006, 06:41 AM

Have you verified that Nodephone accepts incoming forwarded SIP calls? Many VoIP providers do not. SIP Broker's status for Nodephone would seem to indicate they do not.

Ron

Markovich · 10-02-2006, 08:54 AM

Is direct IP dialling an option (I don't know if VoXaLot's call forward feature supports IP dialling, or whether your SIP device can accept incoming direct IP calls)?

That is, setting VoXaLot's call forward to <nodephonenumber>@<IP address>, where <IP address> is either your existing static IP address, or, if your IP number is dynamic, <nodephonenumber>@<dynamic domain>, using a dynamic DNS service such as DynDNS.

751177 · 10-02-2006, 07:03 PM

Many thanks for your replies.

Sorry, I made a mistake trying to explain my problem.

I should have said that I want to forward calls directly to my Sipura adapter i.e. <number>@<my domain> (not <number>@internode.on.net)

I know that direct i dialling works because I've tested it.

(Nodephone indeed doesn't accept forwarding)

So when on VoXaLoT I disable Call Forwarding then I get the Mailbox/User "unavailable". If I enable Call Forwarding to <number>@<my domain> then I get a busy tone.

If I call directly my phone (from another location, using a softphone) it works.

Is VoXaLoT using the SRV tag ? (I am with DynDNS which doesn't provide this).

What do I miss ?

Cheers.

10-02-2006, 04:37 AM	#1
751177 Junior Member Join Date: Sep 2006 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Call forwarding question Hello, I have a Sipura 3000 and I am registered with Nodephone. I've set up the Siputa such that direct inbound phone calls work (tested) Given that Nodephone doesn's support DID I was thinking that I could use VoXaLoT Call forwarding such that any calls to <mynumber>@voxalot.com.au get automatically redirected to the <mynodephonenumber>@internode.on.net (using the "default" option) However when I try to call all I get is a busy tone Any hint much appreciated. Many thanks. Cheers.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Important - Call forwarding and Voice Mail	Tony	Voxalot Support	4	03-07-2007 09:16 PM
Call forwarding	shezad	Voxalot Support	9	01-09-2007 03:27 AM
SPA 3000 configuration for Voxalot Voicemail?	MrHatken	Voxalot Support	2	11-12-2006 07:21 AM
Call forwarding & adapter device help	shezad	Voxalot Support	0	10-23-2006 12:27 AM
Call Forwarding Clarification	Mr Metabolism	Voxalot Support	5	07-19-2006 04:05 AM

10-02-2006, 06:41 AM	#2
Ron Join Date: Feb 2006 Posts: 447 Thanks: 4 Thanked 8 Times in 8 Posts	Have you verified that Nodephone accepts incoming forwarded SIP calls? Many VoIP providers do not. SIP Broker's status for Nodephone would seem to indicate they do not. Ron

10-02-2006, 08:54 AM	#3
Markovich Junior Member Join Date: Jun 2006 Location: Sunshine Coast, Australia Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	Is direct IP dialling an option (I don't know if VoXaLot's call forward feature supports IP dialling, or whether your SIP device can accept incoming direct IP calls)? That is, setting VoXaLot's call forward to <nodephonenumber>@<IP address>, where <IP address> is either your existing static IP address, or, if your IP number is dynamic, <nodephonenumber>@<dynamic domain>, using a dynamic DNS service such as DynDNS.

10-02-2006, 07:03 PM	#4
751177 Junior Member Join Date: Sep 2006 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Many thanks for your replies. Sorry, I made a mistake trying to explain my problem. I should have said that I want to forward calls directly to my Sipura adapter i.e. <number>@<my domain> (not <number>@internode.on.net) I know that direct i dialling works because I've tested it. (Nodephone indeed doesn't accept forwarding) So when on VoXaLoT I disable Call Forwarding then I get the Mailbox/User "unavailable". If I enable Call Forwarding to <number>@<my domain> then I get a busy tone. If I call directly my phone (from another location, using a softphone) it works. Is VoXaLoT using the SRV tag ? (I am with DynDNS which doesn't provide this). What do I miss ? Cheers.