Voicemail Access Poll

martin · 05-06-2007, 07:01 AM

Hi guys,

Seems a small number of members are having problems accessing their voicemail. We would like to understand if there is a common reason for this.

Please take the time to dial either *500 or 500 (if you device does not allow leading *'s).

Then post:

1. What is the very first voice prompt you hear (comedian mail or password etc)
2. Entering password works ok
3. Device you are using
4. DTMF setting
5. Codec is device

Edit: Added 5th option (Codec). Feel free to edit existing entries.

Thanks alot.

clundestad · 05-06-2007, 07:52 AM

1. "Password"
2. OK
3. ZyXeL Prestige 2002
4. RFC 2833
5. G711a

sebafett · 05-06-2007, 08:39 AM

1. Password
2. OK
3. ZyXeL Prestige 2002
4. RFC 2833

gambrinus · 05-06-2007, 09:27 AM

1. "Password"
2. no, "Login incorrect"
3. X-Pro (Global IP Telecom release 2006r build stamp 12448)
4. see Screenshot
5. I tried alaw, ulaw, G729, iLBC and GSM. Same results.

martin · 05-06-2007, 09:46 AM

Quote:

Originally Posted by gambrinus

1. "Password"
2. no, "Login incorrect"
3. X-Pro (Global IP Telecom release 2006r build stamp 12448)
4. see Screenshot

Thanks, what Codec are you using?

MarkLL · 05-06-2007, 11:49 AM

1. Password
2. Yes
3. Snom 320
4. Out-of-band
5. G729 and G711U (tried both)

1. Password
2. Yes
3. Grandstream HT-386/Epygi
4. RFC 2833 / OoB
5. G711U

ctylor · 05-06-2007, 02:16 PM

1. "Password?"
2. OK
3. SPA-2100
4. DTMF: Auto
5. Preferred G711-mu

1. "Password?"
2. OK
3. X-lite v3.0
4. DTMF: Default setting
5. All enabled

gambrinus · 05-06-2007, 03:10 PM

Quote:

Originally Posted by martin

Thanks, what Codec are you using?

Should I change my DTMF settings? I don't have a clue what to change... Please advice if you need further input. I will also try with hardware ATA as soon as I am home again.
Would the X-Pro diagnostics log be of any help for you?

kurun · 05-06-2007, 03:47 PM

1. "Password?" - Same response for [500] or [*500]
2. Entering password works ok
3. GS GXP-2000 or HT-496 (Call Features set to [No] in both cases)
4. DTMF setting - RFC2833
5. Codec in device - G711a,u, G729, etc.

Dialling *010*500 or *010500 gives an error message "We are sorry. The number you have called could not be connected. Please try again"

If accessing through a third party VSP in Voxalot via the VSP's Sip-Broker access code, then dialling *010*500 or *010500 both work.
The message I get is "Comedian Mail. Mail Box?"

SJ-Phone - For some reason dialling *500 or 500 both do not work.
Call terminates due to "408 request time-out".
I'm pretty sure it used to work before.
Calls to other extensions do work however.

richard · 05-06-2007, 05:35 PM

1. "Password"
2. Login Works
3. eyeBeam 1.5
4. Not sure on DMTF code (they seem to be hiding this info in 1.5)
4. G711u

05-06-2007, 07:01 AM	#1
martin Join Date: Feb 2006 Posts: 2,930 Thanks: 528 Thanked 646 Times in 340 Posts	Voicemail Access Poll Hi guys, Seems a small number of members are having problems accessing their voicemail. We would like to understand if there is a common reason for this. Please take the time to dial either 500 or 500 (if you device does not allow leading 's). Then post: 1. What is the very first voice prompt you hear (comedian mail or password etc) 2. Entering password works ok 3. Device you are using 4. DTMF setting 5. Codec is device Edit: Added 5th option (Codec). Feel free to edit existing entries. Thanks alot. __________________ Martin Please post support questions on the forum. Do not send PMs unless requested. Last edited by martin; 05-06-2007 at 09:47 AM.

05-06-2007, 07:52 AM	#2
clundestad Member Join Date: Jul 2006 Location: Oslo, Norway Posts: 43 Thanks: 4 Thanked 10 Times in 8 Posts	1. "Password" 2. OK 3. ZyXeL Prestige 2002 4. RFC 2833 5. G711a Last edited by clundestad; 05-06-2007 at 03:20 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Short Voicemail Annoyance	TBhimdi	Voxalot Support	1	05-20-2007 10:58 PM
Voicemail Issue	richard	Voxalot Support	8	05-08-2007 03:23 AM
Suggestion: Quick Access to Voicemail via SipBroker	richard	Voxalot Support	0	05-05-2007 02:05 PM
unable to access voicemail and speed dial using GS HT 386	pranzo	Voxalot Support	13	03-12-2007 10:35 AM
Voicemail access	Jean-Luke	Voxalot Support	3	01-14-2007 04:58 AM

05-06-2007, 08:39 AM	#3
sebafett Junior Member Join Date: Apr 2007 Posts: 4 Thanks: 2 Thanked 2 Times in 2 Posts	1. Password 2. OK 3. ZyXeL Prestige 2002 4. RFC 2833

05-06-2007, 11:49 AM	#6
MarkLL Member Join Date: Aug 2006 Posts: 44 Thanks: 1 Thanked 4 Times in 4 Posts	1. Password 2. Yes 3. Snom 320 4. Out-of-band 5. G729 and G711U (tried both) 1. Password 2. Yes 3. Grandstream HT-386/Epygi 4. RFC 2833 / OoB 5. G711U

05-06-2007, 02:16 PM	#7
ctylor Join Date: Apr 2006 Location: Vancouver, BC Posts: 296 Thanks: 94 Thanked 53 Times in 27 Posts	1. "Password?" 2. OK 3. SPA-2100 4. DTMF: Auto 5. Preferred G711-mu 1. "Password?" 2. OK 3. X-lite v3.0 4. DTMF: Default setting 5. All enabled

05-06-2007, 03:47 PM	#9
kurun Join Date: Sep 2006 Location: Toronto, Canada Posts: 568 Thanks: 70 Thanked 147 Times in 115 Posts	1. "Password?" - Same response for [500] or [500] 2. Entering password works ok 3. GS GXP-2000 or HT-496 (Call Features set to [No] in both cases) 4. DTMF setting - RFC2833 5. Codec in device - G711a,u, G729, etc. Dialling 010500 or 010500 gives an error message "We are sorry. The number you have called could not be connected. Please try again" If accessing through a third party VSP in Voxalot via the VSP's Sip-Broker access code, then dialling 010500 or 010500 both work. The message I get is "Comedian Mail. Mail Box?" SJ-Phone - For some reason dialling 500 or 500 both do not work. Call terminates due to "408 request time-out". I'm pretty sure it used to work before. Calls to other extensions do work however.

05-06-2007, 05:35 PM	#10
richard Senior Member Join Date: Mar 2006 Posts: 153 Thanks: 37 Thanked 7 Times in 7 Posts	1. "Password" 2. Login Works 3. eyeBeam 1.5 4. Not sure on DMTF code (they seem to be hiding this info in 1.5) 4. G711u