* in ata = speed dial

muzzza · 08-26-2006, 11:10 PM

Hello,
I tried a search but didn't come up with anything usefull.

I have an old Billion 7100sv voip router which uses * as its speed dial, an I want to be able to call sip to sip - eg *320xxxxxx or *011(sipbroker) etc.

There is no dial plan in this router, only the * speed dial, and can only register 1 vsp.

Can anyone help me get this to work?

M

Markovich · 08-27-2006, 01:01 AM

If it's anything like my 7402VGO, it may not like using * in dialled numbers without adding a specific entry into a dial plan to allow it. In the case of the 7402VGO the entry can be either *x.T or <*:*>x.T. If your router does not have a dial plan, this may not be possible.

muzzza · 08-27-2006, 06:10 AM

that is why I want to be able to set up in voxalot, can this not be done in a voxalot dial plan?

affinity · 08-27-2006, 07:12 AM

A current problem with the dial plans is that you must select a provider, but you cannot add or use sipbroker as a provider in a dial plan.

If you could use sipbroker in a dial plan, then your problem would be solved with an advanced dial plan something like this:
_998877*x. ${EXTEN:6} Sipbroker Yes

The you would dial:
998877*320...

An alternative could be like this:
_320X. ${EXTEN:3} SIPME Yes
-- that will work for SIPME at least, but not for voxalot as you want.

muzzza · 08-27-2006, 07:28 AM

I should be able to use sipbroker in the dial plan, as i have them set up as a provider, on the back of a vsp. I also have sipme as a provider who also directs sipbroker forwarding automaticaly.

So could I use something like this:
_3*x.$[EXTEN:1] SIPBROKER OR SIPME or voxalot YES

then if i dial 3*xxxx it would go thru to sipbroker?

affinity · 08-27-2006, 07:55 AM

I just added this dial plan:
321 _321X. *${EXTEN:3} SIPME Yes

It works, no need to enter the *.

Tested fine with:
321393613 FWD Echo test
321266300 Monkey's test

affinity · 08-27-2006, 07:56 AM

I didn't know that SIPME fully supported sipbroker calling patterns.

Ron · 08-27-2006, 11:12 AM

Quote:

Originally Posted by affinity

I didn't know that SIPME fully supported sipbroker calling patterns.

It's not SIPME supporting Sip Broker calling. VoXaLot's Dial Plan processing recognizes the * and redirects the call to Sip Broker.

Ron

affinity · 08-27-2006, 12:47 PM

On that basis I thought I would try a dial plan that gave a test result of:
to sip:**2@sip.sipme.com.au

However, it didn't ring my speed dial number 2...

martin · 08-27-2006, 01:55 PM

Yes both SIP Broker and VoXaLot need to be added as providers automatically within dial plans (like they are in Webcallback). It is something we are aware of and will be an improvement.

08-26-2006, 11:10 PM	#1
muzzza Junior Member Join Date: Aug 2006 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	* in ata = speed dial Hello, I tried a search but didn't come up with anything usefull. I have an old Billion 7100sv voip router which uses * as its speed dial, an I want to be able to call sip to sip - eg 320xxxxxx or 011(sipbroker) etc. There is no dial plan in this router, only the * speed dial, and can only register 1 vsp. Can anyone help me get this to work? M

08-27-2006, 01:55 PM	#10
martin Join Date: Feb 2006 Posts: 2,930 Thanks: 528 Thanked 646 Times in 340 Posts	Yes both SIP Broker and VoXaLot need to be added as providers automatically within dial plans (like they are in Webcallback). It is something we are aware of and will be an improvement. __________________ Martin Please post support questions on the forum. Do not send PMs unless requested.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problems accessing Voxalot Speed Dial	Jay	Voxalot Support	10	11-26-2007 09:08 AM
Copying speed dial entries to a second account.	ozimarco	Voxalot Support	13	09-17-2007 08:08 AM
dial plan for ** won't get you speed dial	d85551	Voxalot Support	0	11-30-2006 12:00 PM
Idea for unlimited easy speed dial	raphoumail	Voxalot Support	5	10-12-2006 05:48 PM
Speed dial - Something wrong	Vegetus	Voxalot Support	14	08-03-2006 02:35 AM

08-27-2006, 01:01 AM	#2
Markovich Junior Member Join Date: Jun 2006 Location: Sunshine Coast, Australia Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	If it's anything like my 7402VGO, it may not like using * in dialled numbers without adding a specific entry into a dial plan to allow it. In the case of the 7402VGO the entry can be either x.T or <:>x.T*. If your router does not have a dial plan, this may not be possible.

08-27-2006, 06:10 AM	#3
muzzza Junior Member Join Date: Aug 2006 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	that is why I want to be able to set up in voxalot, can this not be done in a voxalot dial plan?

08-27-2006, 07:12 AM	#4
affinity Join Date: Apr 2006 Posts: 799 Thanks: 66 Thanked 61 Times in 44 Posts	A current problem with the dial plans is that you must select a provider, but you cannot add or use sipbroker as a provider in a dial plan. If you could use sipbroker in a dial plan, then your problem would be solved with an advanced dial plan something like this: _998877x. ${EXTEN:6} Sipbroker Yes The you would dial: 998877320... An alternative could be like this: _320X. ${EXTEN:3} SIPME Yes -- that will work for SIPME at least, but not for voxalot as you want.

08-27-2006, 07:28 AM	#5
muzzza Junior Member Join Date: Aug 2006 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	I should be able to use sipbroker in the dial plan, as i have them set up as a provider, on the back of a vsp. I also have sipme as a provider who also directs sipbroker forwarding automaticaly. So could I use something like this: _3x.$[EXTEN:1] SIPBROKER OR SIPME or voxalot YES then if i dial 3xxxx it would go thru to sipbroker?

08-27-2006, 07:55 AM	#6
affinity Join Date: Apr 2006 Posts: 799 Thanks: 66 Thanked 61 Times in 44 Posts	I just added this dial plan: 321 _321X. ${EXTEN:3} SIPME Yes It works, no need to enter the . Tested fine with: 321393613 FWD Echo test 321266300 Monkey's test

08-27-2006, 07:56 AM	#7
affinity Join Date: Apr 2006 Posts: 799 Thanks: 66 Thanked 61 Times in 44 Posts	I didn't know that SIPME fully supported sipbroker calling patterns.

08-27-2006, 12:47 PM	#9
affinity Join Date: Apr 2006 Posts: 799 Thanks: 66 Thanked 61 Times in 44 Posts	On that basis I thought I would try a dial plan that gave a test result of: to sip:**2@sip.sipme.com.au However, it didn't ring my speed dial number 2...