|
Voxalot Support Support for the Voxalot service. |
Thread Tools | Display Modes |
11-28-2007, 07:45 AM | #1 |
Junior Member
Join Date: Nov 2007
Location: Melbourne, Victoria, Australia
Posts: 4
Thanks: 0 Thanked 0 Times in 0 Posts |
MyNetFone/Voxalot/SIP Broker engaged tone
I have recently taken the plunge and become a VOIP user.
I am using a Linksys SPA3102 as my ATA/Router. I have set up an account with Voxalot and SIPBroker. I have also been able to call *600 which has the echo test. What I CANNOT do is dial in from my PSTN using the SIPBroker Melbourne Australia number and my Voxalot account number. All I am getting is the engaged tone. Can someone please help me, as I am becoming annoyed that I must be close, but not close enough to having it working. Thx |
11-28-2007, 02:21 PM | #2 |
Member
Join Date: Jan 2007
Location: Melbourne, AU
Posts: 35
Thanks: 3 Thanked 5 Times in 5 Posts |
What do you get when you call the SIPBroker number? It should be someone asking you to enter the number you want. You should then enter *061nnnnnn where nnnnnn is your VoXaLot account number. You can also use *010nnnnnn and *031nnnnnn.
MG. |
11-28-2007, 10:48 PM | #3 |
Junior Member
Join Date: Nov 2007
Location: Melbourne, Victoria, Australia
Posts: 4
Thanks: 0 Thanked 0 Times in 0 Posts |
Thanks for your reply MG.
When I call the SIPBroker number, it asks me to dial the number required. I dial the *061xxxxxx# and then it comes back with an engaged tone. |
11-29-2007, 03:38 AM | #4 | |
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts |
Quote:
If that's the case you may want to check if VoXalot is registered properly with the ATA and that you are not having NAT issues.... If you enter your VoXalot URI here (like xxxxxx@au.voxalot.com) SIPBroker - EziDial and press dial, does your phone ring and do you hear the ECHO test lady? |
|
11-29-2007, 06:41 AM | #5 |
Junior Member
Join Date: Nov 2007
Location: Melbourne, Victoria, Australia
Posts: 4
Thanks: 0 Thanked 0 Times in 0 Posts |
Thanks for your suggestion emoci.
I tried the link and the phone did not ring. Do you have any other ideas I can try? I didnt realise how complicated this would be :-( |
11-29-2007, 05:32 PM | #6 | |
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts |
There is one of two problems here:
1. Your ATA is not registering with VoXalot (hence no incoming calls) 2. Your ATA is registered with VoXalot, but it is behind a router which is blocking incoming traffic Here is a detailed guide on how to set up your SPA http://forum.voxalot.com/voxalot-gen...lkthrough.html A few highlights from that guide that may help with incoming calls -Preferably make sure you have STUN set up in your ATA (stun.xten.com has been working for me) -If you are behind a router that has UPnP, make sure it's active -This is optional, but it may help to open these port ranges and forward them to your ATA's IP: 5050-5064 5000-5005 16300-16500 (This is a bit hardware/software specific, it may change from one to the next, check within your device it should have a specification of which RTP ports it uses) Confirming things are working: Outgoing Calls : Can you reach *600 (Echo Test) Incoming Calls: Can you reach the ATA via SIPBroker or the EziDial link I gave you above Quote:
Last edited by emoci; 02-18-2008 at 09:39 PM. |
|
11-29-2007, 10:14 PM | #7 |
Junior Member
Join Date: Nov 2007
Location: Melbourne, Victoria, Australia
Posts: 4
Thanks: 0 Thanked 0 Times in 0 Posts |
Thank you very much for your detailed response emoci.
What ramifications will all this have with my primary VSP who is MyNetFone - I am currently using MNF for outgoing calls. |
11-29-2007, 10:38 PM | #8 | |
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts |
Quote:
However if you have some way to receive incoming calls with MNF, it would be a nice test to see if incoming calls work in that case.... Eventually, when you manage to get things working, you can set up MNF within VoXalot and use from within VoXalot to make calls BTW, it should say stun.xten.com not .org above |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SIP Broker Access Numbers and Dail Tone | yfm | SIP Broker Support | 2 | 07-15-2007 02:45 AM |
SipBroker in Japanese press | v164 | SIP Broker Support | 11 | 06-23-2007 03:40 AM |
please explain sip-broker for beginners | bitbonk | SIP Broker Support | 7 | 03-29-2007 02:05 AM |
Engaged tone v silence | 738376 | Voxalot Support | 0 | 03-15-2007 08:40 PM |