|
Voxalot Support Support for the Voxalot service. |
|
Thread Tools | Display Modes |
|
07-19-2008, 01:40 PM | #1 |
Junior Member
Join Date: Jul 2008
Location: Netherlands
Posts: 7
Thanks: 5 Thanked 0 Times in 0 Posts |
Cannot make calls using Voxalot service
Hello
I am using a Speedtouch 780WL ADSL modem for VOIP however I seem unable to make calls via the eu.voxalot.com proxy. The Speedtouch gives me the following voice message: "We are sorry, the number you called could not be connected; please try again" This is the Speedtouch W80WL log (Newest events first) Info 02:41:06 (since last boot) FIREWALL event (1 of 3): disabled rules Info 02:41:04 (since last boot) VOIP: Send 200 OK Info 02:41:04 (since last boot) VOIP: Recv BYE Info 02:40:59 (since last boot) VOIP: Send ACK Info 02:40:59 (since last boot) VOIP: Recv 200 OK Info 02:40:58 (since last boot) VOIP: Recv 100 trying -- your call is important to us Info 02:40:57 (since last boot) VOIP: Recv 100 Trying Info 02:40:57 (since last boot) VOIP: Send INVITE Info 02:40:57 (since last boot) VOIP: Send ACK Info 02:40:57 (since last boot) VOIP: Recv 407 Proxy Authentication Required Info 02:40:57 (since last boot) VOIP: Send INVITE Info 02:40:57 (since last boot) FIREWALL event (1 of 3): enabled rules Info 02:40:57 (since last boot) FIREWALL event (1 of 12): modified rules Notes: I am in the Netherlands All wiring is correct and the phone is connected to telephone port 1 and the PSTN port on the router is connected to the telephone port on the ADSL splitter. I can ping eu.voxalot.com The service is Registered OK with eu.voxalot.com The Firewall in the Speedtouch is disabled. I have no dialling plans configured The service configuration in the Speedtouch is as follows: Enable Telephony tick box is ticked. Registrar: eu.voxalot.com Registrar Port: 5060 Proxy: eu.voxalot.com Proxy port: 5060 Expire Time: 3600 The telephone identity in the Speedtouch is as follows: SIP URL 317351 Username: 317351 Password: ************* Displayname: phone1 Abreviated number: Port: Phone 1 I have attached the relevant part of the Speedtouch 780WL On the face of it, it should work but doesn't. Any help would be really apreciated. Bob Rathbone |
07-19-2008, 04:28 PM | #2 |
Join Date: Sep 2006
Location: Toronto, Canada
Posts: 568
Thanks: 70 Thanked 147 Times in 115 Posts |
Can you dial 500 (Voicemail) or 600 (Echotest)?
Also try *500 and *600 to check if your ATA is allowing leading[*] when dialing out. Try *266300 (Test call via SipBroker). Try *18005558355 (Tell Me service) These calls are automatically handled by the Voxalot default dial plan. Try to reach your Voxalot extension using one of the SipBroker Access numbers. SIPBroker - PSTN Numbers After reaching the Sipbroker service, dial *010xxxxxx and # or [Send] (xxxxxx=Voxalot Account Number). This format works independently of which server you are logged on to. I usually set my ATA expiration time to a lower number than 3600 (120 to 600 seconds). For other call testing using Registered or unregistered PSTN type providers, you will very likely need a Dial Plan set-up. Configuring Smart Call (Dial Plan) Settings - Voxalot FAQ You can also try logging onto a different Voxalot server (Eg us.voxalot.com). If you do that, identify the preferred cluster on your log-in page to match, although I am not sure if it really makes a difference. Rgrds |
07-19-2008, 05:41 PM | #3 |
Junior Member
Join Date: Jul 2008
Location: Netherlands
Posts: 7
Thanks: 5 Thanked 0 Times in 0 Posts |
Kurun,
Many thanks for posting the a reply. Can you dial 500 (Voicemail) or 600 (Echotest)? REPLY: Yes this works Also try *500 and *600 to check if your ATA is allowing leading[*] when dialing out. REPLY: Yes this works Try *266300 (Test call via SipBroker). REPLY: This works Try *18005558355 (Tell Me service) REPLY: This works. Try to reach your Voxalot extension using one of the SipBroker Access numbers. REPLY: I tried +31307110327 (Netherlands) but this didn't work. I tried dialling 003107110327 and 3107110327 You can also try logging onto a different Voxalot server (Eg us.voxalot.com). REPLY: THis made no difference I also set the timeout as suggested to 600. I am trying to understand how dial plans are configured in the Speedtouch 780WL so I don't have any set up yet. Regards Bob Rathbone |
07-19-2008, 08:13 PM | #4 | |
Join Date: Sep 2006
Location: Toronto, Canada
Posts: 568
Thanks: 70 Thanked 147 Times in 115 Posts |
If you cannot reach your account from a Sip-Broker access number (this must be dialled from a different phone), then your ATA is not reliably registering with the Voxalot server. The fact that you can dial out means that you (your SIP device) can find and communicate with the server, but the reverse is not necessarily true.
Quote:
Log-in to your Voxalot account and go to the following link : http://www.voxalot.com/action/dialPlanList I am not familiar with the dialplan features of your ATA or if any are required at all. Since the PSTN providers are hosted in your Voxalot account, a dial plan is definitely required there. Regards Last edited by kurun; 07-19-2008 at 08:20 PM. |
|
07-20-2008, 04:33 AM | #5 |
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts |
I am not familiar with the dial plans on the SpeedTouch either, but the fact that *500 and *600 are working fine, means that whatever Dial Plan you've got set up right now in the SpeedTouch is pretty good...
1. Let's make sure you can receive calls You have two Options to test: Option 1 -Call +31-30-711-0327 from a regular phone line(from within the country, it is a call to 30-711-0327, where 30 is the city code for Nieuwegein I gather...hopefully that helps you figure out how to dial)... -Listen to the message and wait for the dialtone -Then enter *010-123456 (replace 123456 with your VoXalot number) -Does the phone attached to the SpeedTouch ring? or Option 2 -Go to SIPBroker - EziDial -There enter your VoXalot SIP URI, in the form 123456@voxalot.com (again replace 123456 with your own 6 digit number) -If things go well you should receive a call that connects you with the echo test application 2. Making outgoing calls The message you are hearing is actually from VoXalot (so you are reaching the server)...before you can make any calls you first need to: -Configure providers (see Configuring Provider Settings - Voxalot FAQ ) -Configure Dial Plans within VoXalot...nothing to do with your SpeedTouch here (see Configuring Smart Call (Dial Plan) Settings - Voxalot FAQ ) Last edited by emoci; 07-20-2008 at 04:43 AM. |
07-21-2008, 05:26 AM | #6 |
Junior Member
Join Date: Jul 2008
Location: Netherlands
Posts: 7
Thanks: 5 Thanked 0 Times in 0 Posts |
Emoci
Many thanks for your suggestion I was able to receive calls using both Option 1 and Option 2 without problem. (Coincidentally I work in Nieuwegein!) Kurun I set up a simple EziDial # Pattern Replacement Provider Active 1 _0. ${EXTEN} Voxalot Yes I am still unable to dial any outgoing numbers for example. 0031<my mobile number> (I live in the Netherlands so my international code is 31) If I want to dial a number in the UK (International code 44) and assuming no number replacement or changes in any dial plan, what form must I use over voip. 004412345678 4412345678 04412345678 ????? Regards Bob Rathbone |
08-23-2008, 05:39 AM | #7 | |
Member
Join Date: Jul 2008
Posts: 49
Thanks: 4 Thanked 10 Times in 9 Posts |
not able to make calls with the speedtouch 706
Quote:
I helped friends set up a basic voxalot account. They use a speedtouch 706. The ATA expiration time is 3600 but I also tried 600. Their account is logged on to eu.voxalot.com. It's possible to receive calls, access to the outside world is very limited. This is what happens. Dialing to*500 and *600: ok Dialing to a Voxalot account: not possible Dialing to a Voxalot account via Sipbroker (*010xxxxxx): ok Dialing to *266300 or *18005558355: not possible. Dialing to PSTN lines using dial plans with PSTN providers: not possible. I just don't understand this. Help please! Thanks, Zoe |
|
08-23-2008, 04:27 PM | #8 | |
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts |
Quote:
The quickest thing to try here, is using the au or us server, there seems to be an issue with the eu server at the moment... |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Free DID Numbers, Free Voip Calls, & more Voip Info | amroe | Voxalot General | 54 | 01-13-2014 09:11 AM |
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough | ctylor | Voxalot General | 5 | 04-28-2010 12:52 AM |
VoIP situation in Japan - how to improve with ENUM and peering. | v164 | Voxalot General | 2 | 02-02-2008 03:05 PM |
Can't make outgoing calls on Voxalot | richard | Voxalot Support | 10 | 08-23-2007 01:30 AM |
Any outages with Voxalot Service - No Outgoing calls | shibukraj | Voxalot Support | 5 | 11-21-2006 05:02 PM |