|
Voxalot Support Support for the Voxalot service. |
Thread Tools | Display Modes |
04-16-2006, 03:07 AM | #1 |
Member
Join Date: Apr 2006
Posts: 48
Thanks: 0 Thanked 0 Times in 0 Posts |
Setting up Dial Plan - help needed
I am nearly there - I just need some pointers on getting dial plans to work.
I have added (<#1,:>[x*][x*].<:@gw1>) to the back of my SPA-3000 dial plan. When I dial #1 *011 xxx all works fine - great! I know what <#1,:> does, but what does and <:@gw1> but what does [X*][X*] actually mean. EDIT: OK, I now realise that this means either XX. or **. or X*. or *X. But wouldn't it make more sense to have [X*]X. as why would you ever need **. or X*.? Can someone please explain how this portion works. Now I want to leverage the power of ENUM for all my outbound calls. What I want to do is send all calls to VoXaLot and have VoXaLot route the non ENUM calls to Engin for me. So what I did was change the dial plan fragment above to this (XX.<:@gw1>) thinking that any number I dialled would be sent to Voxalot. Now I have 1 VSP set up with voxalot. I set up a dial plan in Voxalot like this _X. => Engin thinking that any number sent to Voxalot would be routed to Engin for me (after the ENUM checkup), but all I get now is the engaged signal. Can someone point me in the right direction. Matt Last edited by Mallycat; 04-16-2006 at 06:28 AM. |
04-16-2006, 07:03 AM | #2 |
Join Date: Feb 2006
Posts: 447
Thanks: 4 Thanked 8 Times in 8 Posts |
Matt,
<:@gw1> tells the SPA-3000 to use the Gateway1 provider for this term of the dial plan. Presumably, you have VoXaLot set up in this slot. You do want to use "[x*][x*]." as the pattern match for VoXaLot so that you can pass arbitrary dial strings. For example, Speed Dial is "**x". I've seen examples of going through Sip Broker to dial toll free numbers in the Netherlands that required embedded asterisk's. At moment, ENUM lookups through VoXaLot are only going to work if the number passed to VoXaLot is already formed in one of the standard international formats (011 + country code + number, for example). VoXaLot will shortly be enhanced to handle ENUM lookups (hopefully) more flexibly. Ron |
04-16-2006, 07:22 AM | #3 |
Junior Member
Join Date: Apr 2006
Posts: 20
Thanks: 0 Thanked 0 Times in 0 Posts |
PAP2 Dial Plan
Hi All,
I've got a PAP2 not a SPA-3000 but this dial plan _may_ be useful. Also, as I don't have much experience with dial plans, if anyone can see any potential problems with it please let me know. Note, I am in NSW, Australia. L:20,S:7,( <0011:> xx . | <04:614>xxxxxxxx | <0:61>xxxxxxxxx | <:612>xxxxxxxx | #[x*]. | [x*][x*]. ) Are there any problems with this dial plan and ENUM lookups? Thanks, Nathan. |
04-16-2006, 08:02 AM | #4 | |
Member
Join Date: Apr 2006
Posts: 48
Thanks: 0 Thanked 0 Times in 0 Posts |
Quote:
<0011:> xx . this looks to me as if you strip the 0011 off of any 0011 number. Is this what you mean to do? I guess it makes sense because you want the country code followed by the area code and number - which is I guess what you want. <04:614>xxxxxxxx Add Australian country code to any mobile number - OK. <0:61>xxxxxxxxx replace the 0 with 61 for any STD number - OK. <:612>xxxxxxxx prepend 612 to any local call (I assume you are in sydney) - ok #[x*]. not sure what this does! [x*][x*]. catch anything else and route it anyway. Looks good to me! Matt |
|
04-16-2006, 08:08 AM | #5 |
Member
Join Date: Apr 2006
Posts: 48
Thanks: 0 Thanked 0 Times in 0 Posts |
So if I follow Nathanc here, this is what I would propose for a dial plan for my SPA-3000 to use SIP broker for ENUM.
(000S0<:@gw0>|<#9:>xx.<:@gw0>|1[38]00xxxxxxS0<:@gw0>|190xxxxxxx!|13xxxxS0<:@gw0>|<001 1:>xx.<:@sipbroker.com>|<04:614>xxxxxxxx<:@sipbrok er.com>|<0:61>xxxxxxxxx<:@sipbroker.com>|<:612>xxx xxxxx<:@sipbroker.com>|[x*][x*].<:@sipbroker.com>) Any critiques? I would like to use VoXaLot and have a gateway set up to route via VoXaLot. I don't know how to forward the calls to my VSP using a voxalot dial plan if the ENUM fails. Any suggestions? Matt |
04-16-2006, 08:14 AM | #6 | |
Member
Join Date: Mar 2006
Posts: 36
Thanks: 3 Thanked 1 Times in 1 Posts |
Quote:
|
|
04-16-2006, 08:21 AM | #7 | |
Join Date: Feb 2006
Posts: 2,930
Thanks: 528 Thanked 646 Times in 340 Posts |
Quote:
00 011 0011 etc You can pass these to VoXaLot and it will strip them out automatically before doing the lookup.
__________________
Martin Please post support questions on the forum. Do not send PMs unless requested. |
|
04-16-2006, 09:01 AM | #8 | ||
Junior Member
Join Date: Apr 2006
Posts: 20
Thanks: 0 Thanked 0 Times in 0 Posts |
Hi Matt,
Quote:
Quote:
The first thing you need to do is to add providers. Login to voxalot and click on the "Providers" menu; then click "Add" and enter the details of engin, etc. The second thing is to then click the "Dial Plans" menu. Add a dial plan that uses your chosen provider. The Tutorials step through the process: http://www.voxalot.com/action/static...lay&itemOID=24 I use Pennytel for mobile calls, so the dial plan looks like: Pattern: _61[4]xxxxxxxx Replacement: ${EXTEN} Provider: Pennytel Thats what I have done and it works fine for me; now whenever I dial a number ENUM is checked and if no record exists the call is placed through the provider. Thats my basic understanding, please correct me if I'm wrong, hope it helps. Cheers, Nathan. |
||
04-16-2006, 09:11 AM | #9 | |||
Junior Member
Join Date: Apr 2006
Posts: 20
Thanks: 0 Thanked 0 Times in 0 Posts |
Hi Matt,
Quote:
Quote:
Quote:
I'm still learning, but this works well, any better solutions? Cheers, Nathan. |
|||
04-16-2006, 09:20 AM | #10 |
Member
Join Date: Apr 2006
Posts: 48
Thanks: 0 Thanked 0 Times in 0 Posts |
We are all new at this! If you have got it doing everything you want, then you are doing well.
Matt |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough | ctylor | Voxalot General | 5 | 04-28-2010 12:52 AM |
Dial plan problems with FaktorTel and VoXaLoT | Hally | Voxalot Support | 1 | 01-06-2007 09:21 AM |
Norway toll free number dial plan ? | shezad | Voxalot Support | 1 | 11-11-2006 12:09 AM |
Setting 500 to go to Voxalot in the dial plan | kurun | Voxalot Support | 0 | 10-25-2006 04:50 AM |
dial plan help please | muzzza | Voxalot Support | 0 | 09-01-2006 11:38 AM |