Speed Dial URI failure

[misky12]

Originally Posted by emoci

Two things to try:

1.Use the test call field, type 81, and see how VoXalot is treating this call (it should tell you somehting along the lines: A call to 81 will be routed to....)

Already tested how VoXalot will treat the call to 81. Said "A call to:81 will get forwarded to miskysumaj via VoipStunt" which seems to be fine. But does NOT work. See image below:

Originally Posted by emoci

2. One quick way, is to set this up as a speed dial instead. Assign a speed dial number, where it says number to call enter the username as above, and choose the provider to handle the call...

Then all you have to do is dial **SpeedDial

Using the speed dial was the first thing I tried. It did NOT work either but at least there is a plausible explanation for this:

Originally Posted by martin

As John suggests some providers do not allow open inbounds (which is what routing via a SIP URI is).

Do as John suggests and route via the number/provider combination i.e.

Number = <user>
Provider = voipstunt
.

See the image below:

[emoci]

Originally Posted by misky12

See the image below:

Ok, using that image, instead of choosing SIP URI, choose Phone Number...

It'll then let you specify the number (miskysumaj in your case) and choose the provider (VoipStunt)

[misky12]

Originally Posted by emoci

Ok, using that image, instead of choosing SIP URI, choose Phone Number...

It'll then let you specify the number (miskysumaj in your case) and choose the provider (VoipStunt)

Thank you very much to emoci and 130166. With their help I finally made it work.

I am now experiencing with several other setup combinations. Time permitting, will post a brief tutorial with the results to help other with similar problems