Click Here To Visit SIP Broker  

Go Back   Voxalot / SIP Broker Support Forums > Voxalot Forums > Voxalot Support

Voxalot Support Support for the Voxalot service.

 
 
Reply
Thread Tools Display Modes
Unread 02-24-2007, 05:08 PM   #1
rybshik
Member
 
Join Date: Sep 2006
Location: Canada
Posts: 67
Thanks: 7
Thanked 0 Times in 0 Posts
rybshik is on a distinguished road
Default in-bound calls either drop or do not stop ringing

I have Sipura 3000 behind the NAT (DSL modem +Linksys WRT54 router).
Sipura is registetered with Voxalot.

Out-bound calls are fine, but in-bound calls either drop on the first ring or do not stop ringing after Sipura's phone handset is picked up.

My Sipura's settings are exactly as in
Voxalot and VOIP Tutorial: A Comprehensive Walkthrough


I guess something needs to be changed in Sipura settings. Please advice

Last edited by rybshik; 02-24-2007 at 05:16 PM.
rybshik is offline   Reply With Quote
Unread 02-24-2007, 07:18 PM   #2
ctylor
 
ctylor's Avatar
 
Join Date: Apr 2006
Location: Vancouver, BC
Posts: 296
Thanks: 94
Thanked 53 Times in 27 Posts
ctylor will become famous soon enough
Default

Unfortunately, connection problems due to firewalls are some of the most difficult to troubleshoot. Here's some advice (may have already been done):

0) Test calls from multiple sources, ideally both:
--a direct SIP URI call from a client like the Gizmo Project softphone
--a call from the PSTN to your DID that is either registered with Voxalot or mapped to Voxalot

1) Toggle from:

NAT Support Parameters heading:
Handle VIA received: No
Handle VIA rport: No
Insert VIA received: No
Insert VIA rport: No
Substitute VIA Addr: Yes
Send Resp To Src Port: Yes
STUN Enable: Yes
STUN Test Enable: No
STUN Server: stun.xten.com
EXT IP: (blank)
EXT RTP Port Min: (blank)
NAT Keep Alive Intvl: 30

to:

NAT Support Parameters heading:
Handle VIA received: Yes
Handle VIA rport: Yes
Insert VIA received: Yes
Insert VIA rport: Yes
Substitute VIA Addr: No
Send Resp To Src Port: No
STUN Enable: Yes
STUN Test Enable: No
STUN Server: stun.xten.com
EXT IP: (blank)
EXT RTP Port Min: (blank)
NAT Keep Alive Intvl: 30

2) Put your SPA-3000 in the WRT54's DMZ (or more exactly, forward the SIP and RTP port ranges used by the SPA to it).
see this thread to clarify why it might be good: http://www.dslreports.com/forum/remark,17884348

3) Toggle between Yes and No for the "Enable symmetric NAT handling" setting on your Voxalot portal.

4) Try temporarily to use a different router and start the process over.
ctylor is offline   Reply With Quote
Unread 02-24-2007, 07:31 PM   #3
rybshik
Member
 
Join Date: Sep 2006
Location: Canada
Posts: 67
Thanks: 7
Thanked 0 Times in 0 Posts
rybshik is on a distinguished road
Default

Quote:
Originally Posted by ctylor View Post
Test calls from multiple sources, ideally both:
--a call from the PSTN to your DID that is either registered with Voxalot or mapped to Voxalot
Ok, here are some test results. I recall that my Voxalot's Sipura is behind the NAT.

In-bound SIP URI calls from Callcentric and DIDWW drop after one ring or do not stop ringing.

In-bound SIP URI calls from my own remote (i.e. different external IP and different sub-net) asterisk are fine.
Martin, why might it be?

In-bound calls from Vitelity (which is registered to Voxalot) are fine.

Last edited by rybshik; 02-24-2007 at 11:58 PM.
rybshik is offline   Reply With Quote
Unread 02-25-2007, 10:51 AM   #4
MarkLL
Member
 
Join Date: Aug 2006
Posts: 44
Thanks: 1
Thanked 4 Times in 4 Posts
MarkLL is on a distinguished road
Default

Voxalot is very versatile in its handling of ATA's behind NAT so calls to DID's registered in Voxalot should work ok.

Are the In-bound SIP URI calls from Callcentric and DIDWW going via Voxalot?

If it works for some and not others, it might be due to the G729 Codec description in the SPA 3000. As a quick test try setting the preferred codec to G711u and set use preferred = yes and see if that makes a difference.
MarkLL is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sipgate incoming calls not ringing lrebibo Voxalot Support 3 05-02-2007 09:05 AM
Incoming calls cut off during ringing filmnet Voxalot Support 2 03-15-2007 07:00 PM
Inbound calls not ringing ATA RossB Voxalot Support 3 03-12-2007 08:49 AM
In-bound calls with Vitelity and DIDWW drop rybshik Voxalot Support 3 02-25-2007 10:55 PM
Help Phone Won't Stop Ringing! ornella Voxalot Support 1 02-20-2007 09:46 PM


All times are GMT. The time now is 01:22 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.