How DID Caller use Voxalot Speed dial?

richard99 · 08-18-2007, 02:15 PM

Using Sipura 3K, is it possible for a DID caller registered in Voxalot to use speed dial? Or any way to use speed dial by callForwarding feature.

emoci · 08-18-2007, 04:24 PM

Quote:

Originally Posted by richard99

Using Sipura 3K, is it possible for a DID caller registered in Voxalot to use speed dial? Or any way to use speed dial by callForwarding feature.

What do you mean by DID Caller?

If you mean someone calling in and accessing CallThrough through Sipura 3K, then they should have access to the VoXalot speed dial (**x)....

richard99 · 08-18-2007, 04:52 PM

Quote:

Originally Posted by emoci

What do you mean by DID Caller?

If you mean someone calling in and accessing CallThrough through Sipura 3K, then they should have access to the VoXalot speed dial (**x)....

Yes...I have voxalot premium account registred at line1 to receive DID calls, But can DID caller access to the VoXalot speed dial (**x) before system ring out.

ataboy · 08-18-2007, 08:35 PM

They can, but:

1. They need to dial in on the PSTN.
2. The PSTN-VOIP gateway has to be enabled on the SPA.
3. You need to register Voxalot on one of the gateways as well as on L1 (i.e. gw1 to gw4).
4. You need to set a PIN access for them.
5. The PIN should have an associated dialplan that routes them to the gw that Voxalot is registered on - something like ([x*][x*].<:@gwx>).

Then they get dialtone from Voxalot (well, actually from the SPA, but you know what I mean) and can use Voxalot services as if they were directly connected.

ataboy

richard99 · 08-19-2007, 04:18 AM

In fact, I am using line1 and PSTN of Sipura both registered with 2 Voxalot accounts. I can make call PSTN to VOIP2 (Voxalot account # 2 registered on PSTN) and from VOIP2 to PSTN .

From line1 using (Voxalot account #1) to make and receive calls too.

My DID is sip forwarded to Line1 (Voxalot preminum), I wanted that when DID caller calls in to line1 he should has means to to use the VoXalot speed dial (**x) at line 1 or PSTN to forward the call at pre-defined Speed dial using Voxalot Premium callforwarding feature.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough	ctylor	Voxalot General	5	04-28-2010 12:52 AM
Problems accessing Voxalot Speed Dial	Jay	Voxalot Support	10	11-26-2007 09:08 AM
key dial but no speed dial	samjesse	Voxalot Support	4	07-22-2007 06:20 PM
dial plan for ** won't get you speed dial	d85551	Voxalot Support	0	11-30-2006 12:00 PM
Voxalot as Provider in Dial Plan	vpsaini	Voxalot Support	2	06-27-2006 09:36 AM

08-18-2007, 02:15 PM	#1
richard99 Senior Member Join Date: Feb 2007 Location: Indiana, USA Posts: 166 Thanks: 14 Thanked 22 Times in 19 Posts	How DID Caller use Voxalot Speed dial? Using Sipura 3K, is it possible for a DID caller registered in Voxalot to use speed dial? Or any way to use speed dial by callForwarding feature.

08-18-2007, 08:35 PM	#4
ataboy Senior Member Join Date: May 2006 Location: Greater London, UK Posts: 198 Thanks: 36 Thanked 23 Times in 23 Posts	They can, but: 1. They need to dial in on the PSTN. 2. The PSTN-VOIP gateway has to be enabled on the SPA. 3. You need to register Voxalot on one of the gateways as well as on L1 (i.e. gw1 to gw4). 4. You need to set a PIN access for them. 5. The PIN should have an associated dialplan that routes them to the gw that Voxalot is registered on - something like ([x][x].<:@gwx>). Then they get dialtone from Voxalot (well, actually from the SPA, but you know what I mean) and can use Voxalot services as if they were directly connected. ataboy

08-19-2007, 04:18 AM	#5
richard99 Senior Member Join Date: Feb 2007 Location: Indiana, USA Posts: 166 Thanks: 14 Thanked 22 Times in 19 Posts	In fact, I am using line1 and PSTN of Sipura both registered with 2 Voxalot accounts. I can make call PSTN to VOIP2 (Voxalot account # 2 registered on PSTN) and from VOIP2 to PSTN . From line1 using (Voxalot account #1) to make and receive calls too. My DID is sip forwarded to Line1 (Voxalot preminum), I wanted that when DID caller calls in to line1 he should has means to to use the VoXalot speed dial (x) at line 1 or PSTN to forward the call at pre-defined Speed dial using Voxalot Premium** callforwarding feature.