Outbound Call Survey

martin · 08-07-2006, 12:45 PM

Hi,

We have further tuned both VoXaLot servers and would like to get some feedback from you guys on the current status.

Please take the time to answer the survey and post feedback. At this stage we are only interested in the current outbound call performance and stability as compared to last week.

Thanks

Edit: Spelling

kendid · 08-07-2006, 05:53 PM

Was able to place first call this week! Guess that is an improvement! Good job guys... Time will be the ultimate test...

amgay · 08-08-2006, 05:32 AM

Better now that outbound seems to work everytime, good work, though some calls can still experance a bit of connect lag, 5 seconds for enum , 10 seconds for pstn. I must say I haven't had any failed connects now or 1 minute connect times :-)

Kars · 08-08-2006, 07:32 PM

voxalot.com is much better than last week. I unregistered my ATA from voxalot because it took sometimes as many as 10 tries before an outbound call worked. When I found out inbound calls weren't working either I switched back to a direct link to my provider.

Now both inbound and outbound work fine, and even the echo test seems to have less latency.

View Poll Results: Compared to last week:
voxalot.com is running better	20	66.67%
voxalot.com is the same (unchanged)	2	6.67%
voxalot.com is running worse	0	0%
voxalot.com.au is running better	8	26.67%
voxalot.com.au is the same (unchanged)	0	0%
voxalot.com.au is running worse	0	0%
Voters: 30. You may not vote on this poll

08-07-2006, 12:45 PM	#1
martin Join Date: Feb 2006 Posts: 2,930 Thanks: 528 Thanked 646 Times in 340 Posts	Outbound Call Survey Hi, We have further tuned both VoXaLot servers and would like to get some feedback from you guys on the current status. Please take the time to answer the survey and post feedback. At this stage we are only interested in the current outbound call performance and stability as compared to last week. Thanks Edit: Spelling __________________ Martin Please post support questions on the forum. Do not send PMs unless requested. Last edited by martin; 08-07-2006 at 01:48 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough	ctylor	Voxalot General	5	04-28-2010 12:52 AM
Outbound call using Voipstunt not working	isolve	Voxalot Support	194	04-13-2007 12:53 AM
Can't hear anything using Siemens C450 ip for outbound call using voipbuster	644923	Voxalot Support	2	12-21-2006 08:18 PM
What am I doing wrong here?	code-	Voxalot Support	16	10-20-2006 05:12 PM
Newbie - but please be nice	Mallycat	Voxalot Support	21	04-15-2006 07:50 AM

08-07-2006, 05:53 PM	#2
kendid Member Join Date: Aug 2006 Location: UA Posts: 72 Thanks: 6 Thanked 3 Times in 3 Posts	Was able to place first call this week! Guess that is an improvement! Good job guys... Time will be the ultimate test...

08-08-2006, 05:32 AM	#3
amgay Junior Member Join Date: Jul 2006 Posts: 16 Thanks: 0 Thanked 0 Times in 0 Posts	Better now that outbound seems to work everytime, good work, though some calls can still experance a bit of connect lag, 5 seconds for enum , 10 seconds for pstn. I must say I haven't had any failed connects now or 1 minute connect times :-)

08-08-2006, 07:32 PM	#4
Kars Junior Member Join Date: Jul 2006 Posts: 22 Thanks: 1 Thanked 4 Times in 3 Posts	voxalot.com is much better than last week. I unregistered my ATA from voxalot because it took sometimes as many as 10 tries before an outbound call worked. When I found out inbound calls weren't working either I switched back to a direct link to my provider. Now both inbound and outbound work fine, and even the echo test seems to have less latency.