VoXaLot Now Supports SIP Registrations

[Ron]

As affinity pointed out, your current Dial Plan assumes that all numbers you call via Voip Buster start with '9' and the entire number is to be passed to the provider unchanged. I haven't used VoIP Buster in long time, but I seem to remember they wanted all numbers passed to them to start with '00' followed by the country code followed by the destination number. You use the Replacement field to alter dial string you enter to get it into the format the provider wants. If the '9' should be stripped and a leading '00' added, the Replacement field would look something like:

00${EXTEN:1}

It's probably best to study the available tutorial a little before you proceed.

You definitely need 'voxalot.com' in the Proxy field of the PAP2.

Ron

[scrag]

I'm using Voipbuster.

Dial Plan should be:-
Pattern: _0011.
Replacement: 00${EXTEN:4}
ENUM Replacement: ${EXTEN:4}
Provider: Voipbuster

-If you dial any international number 0011 is replaced with 00 and the extension you wish to connect to. ie; 001149XXXXXXXXXX becomes 0049XXXXXXXXX.
-For ENUM any international number 0011 is replaced with the extension you wish to connect to. ie; 001149XXXXXXXXXX becomes 49XXXXXXXXXX

[guanacux]

I appreciate all the help, I replaced everything and it worked...I finally use this string:

1 _0. 001${EXTEN:1} voipbuster Yes


I appreciate everyones help!


I still have the gizmo failed registrations but I'll wait to see if it register in the next few days....THANK YOU!

My gizmo conf is as follows:

[raphoumail]

Originally Posted by guanacux

I still have the gizmo failed registrations but I'll wait to see if it register in the next few days....THANK YOU!

I have just the same config and it works... just wait one day or more and you will see it will be ok.

[Ron]

Originally Posted by guanacux

I still have the gizmo failed registrations but I'll wait to see if it register in the next few days....THANK YOU!

My gizmo conf is as follows:

Are you sure you've entered the right phone number in the Username field? When I call it, I get a recording saying it's not a correct number. If the only problem was VoXaLot not registering with Gizmo Project, it should go to your Gizmo Project voicemail.

Ron

[guanacux]

Ron,


You were correct, I rechecked and the username was incorrect....I am sorry for causing so much noise with my threads but you guys have been of a lot of help.

I appreciate it very much!


Jorge


p.s. I'll wait the next registration cycle, but it should work ok.

[Jochen]

Originally Posted by Ron

Changes to registrations occur only once a day

Are there fixed times when changes occur?
It's now 26 hours after the last registration, and my latest changes are not done until now.

Regards
Jochen

[martin]

Yes:

voxalot.com: 9:24 - 10:24 GMT
voxalot.com.au: 18:35 - 19:35 GMT

[Jochen]

Originally Posted by martin

Yes:
voxalot.com: 9:24 - 10:24 GMT
voxalot.com.au: 18:35 - 19:35 GMT

Then there must be a problem with my registrations I added yesterday to voxalot.com. They are still "not registered". A friend of mine is also waiting for his registrations.

[martin]

PM me your six digit number an I will take a look