Sipbroker to e164.org down?

kieranmullen · 10-29-2008, 11:37 PM

I tried calling my e164.org registered number and I am getting a fast busy.

I am preceeding it with a * and without a *.

I have verified that the sip uri used also work, although to add them to e164.org they have to be verified through their system anway.
Thank you

martin · 10-30-2008, 12:57 AM

Hi,

SIP Broker uses this ENUM lookup:

SIPBroker - ENUM Lookup

Enter the number you are trying to call and verify the result is as expected.

kieranmullen · 10-30-2008, 01:30 AM

Hello,

The results are as expected in the lookup. The same sip uri has also been verified by calling using gizmoproject.com from an ip address outside of my lan (I have several static ips)

To be fair it just went through 3 times.. Then it starting missing again. it is hit or miss.

it would be nice to have a intelligent error system. sorry but the number you entered XXXXX is not in the system... just in case it is taking one digit as 2

KieranMullen

kieranmullen · 10-30-2008, 03:10 AM

Just to confirm I have tried from my voip line but sometimes the PSTN tones dont come out right so I went ahead and called from my cell phone.

Without getting any decent feedback from the sipbroker phone system to self diagnose this issue, I can only assume a couple of possibilities. (I am sure there are others) Since it is sporadic, perhaps a server is timing out waiting for the e164 servers? or Perhaps it is inserting double digits in the PSTN codes some place? Or perhaps it is due the speed I am entering the numbers? Can it take them fast or slow?

capitandanny · 12-31-2008, 04:29 AM

I am fairly new into this area, but have the impression that something is not right with sipbroker and e164. I have been using voxalot and sipbrokers for several months with no problems, today I decide to register my numbers with e164. For a few hours is was working (and I was really happy), but suddenly I start receiving a busy signal, even when I call the voxalot number directly *010 xxxxxx, doing my trial an error I remove one of the numbers that I register and when I try again was working again without any problem. Does anybody have any idea about this behavior?. Thanks.

kieranmullen · 01-18-2009, 04:23 AM

I always wondered why there is little mention of e164.org on this site anyway? Since voxalot is not a VOIP terminator you think it would not hurt their business to promote e164.org? The more e164.org is promoted the more hopefully people will ad their numbers. I think e164.org is not used as much as it could be.

10-29-2008, 11:37 PM	#1
kieranmullen Senior Member Join Date: Nov 2006 Location: Portland, Oregon USA Posts: 139 Thanks: 0 Thanked 11 Times in 9 Posts	Sipbroker to e164.org down? I tried calling my e164.org registered number and I am getting a fast busy. I am preceeding it with a * and without a *. I have verified that the sip uri used also work, although to add them to e164.org they have to be verified through their system anway. Thank you

10-30-2008, 12:57 AM	#2
martin Join Date: Feb 2006 Posts: 2,930 Thanks: 528 Thanked 646 Times in 340 Posts	Hi, SIP Broker uses this ENUM lookup: SIPBroker - ENUM Lookup Enter the number you are trying to call and verify the result is as expected. __________________ Martin Please post support questions on the forum. Do not send PMs unless requested.

12-31-2008, 04:29 AM	#5
capitandanny Junior Member Join Date: Dec 2008 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Sipbroker to e164.org down? I am fairly new into this area, but have the impression that something is not right with sipbroker and e164. I have been using voxalot and sipbrokers for several months with no problems, today I decide to register my numbers with e164. For a few hours is was working (and I was really happy), but suddenly I start receiving a busy signal, even when I call the voxalot number directly *010 xxxxxx, doing my trial an error I remove one of the numbers that I register and when I try again was working again without any problem. Does anybody have any idea about this behavior?. Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
forwarding Sipbroker call	olegp	SIP Broker Support	5	10-17-2008 04:42 AM
Sipbroker e164.org support on a Billion 7402vgp...	heatray	SIP Broker Support	6	10-09-2008 09:09 AM
ENUM (e164.org) SIPBroker access	carlosalbffgomes	SIP Broker Support	1	06-19-2008 11:11 AM
Suggestion: Quick Access to Voicemail via SipBroker	richard	Voxalot Support	0	05-05-2007 02:05 PM
SIP to SIP Calls and e164.org	pmerrill	Voxalot Support	9	05-02-2006 02:10 AM

10-30-2008, 01:30 AM	#3
kieranmullen Senior Member Join Date: Nov 2006 Location: Portland, Oregon USA Posts: 139 Thanks: 0 Thanked 11 Times in 9 Posts	Hello, The results are as expected in the lookup. The same sip uri has also been verified by calling using gizmoproject.com from an ip address outside of my lan (I have several static ips) To be fair it just went through 3 times.. Then it starting missing again. it is hit or miss. it would be nice to have a intelligent error system. sorry but the number you entered XXXXX is not in the system... just in case it is taking one digit as 2 KieranMullen

10-30-2008, 03:10 AM	#4
kieranmullen Senior Member Join Date: Nov 2006 Location: Portland, Oregon USA Posts: 139 Thanks: 0 Thanked 11 Times in 9 Posts	Just to confirm I have tried from my voip line but sometimes the PSTN tones dont come out right so I went ahead and called from my cell phone. Without getting any decent feedback from the sipbroker phone system to self diagnose this issue, I can only assume a couple of possibilities. (I am sure there are others) Since it is sporadic, perhaps a server is timing out waiting for the e164 servers? or Perhaps it is inserting double digits in the PSTN codes some place? Or perhaps it is due the speed I am entering the numbers? Can it take them fast or slow?

01-18-2009, 04:23 AM	#6
kieranmullen Senior Member Join Date: Nov 2006 Location: Portland, Oregon USA Posts: 139 Thanks: 0 Thanked 11 Times in 9 Posts	I always wondered why there is little mention of e164.org on this site anyway? Since voxalot is not a VOIP terminator you think it would not hurt their business to promote e164.org? The more e164.org is promoted the more hopefully people will ad their numbers. I think e164.org is not used as much as it could be.