Support

jiska78 · 09-05-2007, 06:54 AM

I just want some help but everytime I post it says it's spam.

jiska78 · 09-05-2007, 07:07 AM

I confess to being a complete an utter newbie when setting up VOIP. Can someone please let me know the settings to put in to the DLINK DVG-1402S router? I am able to get the router working fine with Pennytel, but once I change the settings over to Voxalot I can't get it working. Relevant settings pages are as follows:

http://www.stbproductions.net/VOIP.JPG
http://www.stbproductions.net/VOIP2.JPG

Note that if I change the "voxalot.com" entries to "sip.pennytel.com" and alter the username/password, Pennytel works perfectly.

Any help would be great!

cstewart · 09-05-2007, 08:08 AM

Just try the seeting as advised in the following link:

SIPphone Forum :: View topic - Step by Step - SIPPhone and DVG-1402S Settings

Substitute the sipphone settings for voxalot.

The sipphone site has many messages about the dvg-1402s

130166 · 09-05-2007, 09:34 AM

Phonenumber = voxalot userid !?
Outbound proxy XX.voxalot.com XX=eu, au or us ?

jiska78 · 09-05-2007, 10:37 PM

Bingo. Phone number needed to be the Voxalot userid. Thankyou very much for your help.

boatman · 09-06-2007, 05:25 AM

Quote:

Originally Posted by jiska78

I confess to being a complete an utter newbie when setting up VOIP. Can someone please let me know the settings to put in to the DLINK DVG-1402S router? I am able to get the router working fine with Pennytel, but once I change the settings over to Voxalot I can't get it working. Relevant settings pages are as follows:

http://www.stbproductions.net/VOIP.JPG
http://www.stbproductions.net/VOIP2.JPG

Note that if I change the "voxalot.com" entries to "sip.pennytel.com" and alter the username/password, Pennytel works perfectly.

Any help would be great!

Which firmware does your unit have?

There are at least two varieties of the hardware and also various firmware versions. The DVG-1402S is a router and should be placed as the first thing connected to your cable/DSL router in order to avoid port forwarding and NAT issues. It's got a console port, very handy but you must have a level shifter to use the console port because it uses 0 to 3 volt signals, not RS232.

At least some versions of the DVG-1402S units can work with Voxalot. It was popular with Sipphone users, so you can find a lot of info about it in the sipphone forums, and maybe also in the gizmoproject forums. A good DVG-1402S resource page is here:
SIPphone SIPphone Support

Sipphone has some firmware which you can download if you think it would help. I have used Sipphone firmware S049, but I did not try it with Voxalot. If you decide to change firmware you should read this first:
SIPphone Forum :: View topic - DVG-1402S, switch to standby firmware

As for settings, just follow the Sipphone settings but substitute your Voxalot userID and password, and change to proxy01.sipphone.com to us.voxalot.com or the Voxalot server nearest you.

ddang · 09-08-2007, 03:10 AM

May I ask a question, do Voxalot support for IP Video phone? i.e. GXV-3000 IP Video Phone

Could any Members or Voxalot Reps please advice? If possible, could you please advise the Setup manual?

Otherwise when can we use it on Voxalot or other VOIP provider ?

Thank

09-05-2007, 06:54 AM	#1
jiska78 Junior Member Join Date: Sep 2007 Posts: 4 Thanks: 1 Thanked 0 Times in 0 Posts	Support I just want some help but everytime I post it says it's spam.

09-05-2007, 08:08 AM	#3
cstewart Junior Member Join Date: Mar 2007 Location: Bangkok Posts: 9 Thanks: 1 Thanked 5 Times in 1 Posts	DLINK DVG-1402s Just try the seeting as advised in the following link: SIPphone Forum :: View topic - Step by Step - SIPPhone and DVG-1402S Settings Substitute the sipphone settings for voxalot. The sipphone site has many messages about the dvg-1402s

09-08-2007, 03:10 AM	#7
ddang Junior Member Join Date: Feb 2007 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	Ip Video phone May I ask a question, do Voxalot support for IP Video phone? i.e. GXV-3000 IP Video Phone Could any Members or Voxalot Reps please advice? If possible, could you please advise the Setup manual? Otherwise when can we use it on Voxalot or other VOIP provider ? Thank

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
eSeries STUN Support (VoIP Client 2.x)	patos	Voxalot Support	11	04-12-2007 12:04 PM

09-05-2007, 07:07 AM	#2
jiska78 Junior Member Join Date: Sep 2007 Posts: 4 Thanks: 1 Thanked 0 Times in 0 Posts	I confess to being a complete an utter newbie when setting up VOIP. Can someone please let me know the settings to put in to the DLINK DVG-1402S router? I am able to get the router working fine with Pennytel, but once I change the settings over to Voxalot I can't get it working. Relevant settings pages are as follows: http://www.stbproductions.net/VOIP.JPG http://www.stbproductions.net/VOIP2.JPG Note that if I change the "voxalot.com" entries to "sip.pennytel.com" and alter the username/password, Pennytel works perfectly. Any help would be great!

09-05-2007, 09:34 AM	#4
130166 Senior Member Join Date: May 2007 Location: Katwijk, The Netherlands Posts: 133 Thanks: 57 Thanked 32 Times in 27 Posts	Phonenumber = voxalot userid !? Outbound proxy XX.voxalot.com XX=eu, au or us ?

09-05-2007, 10:37 PM	#5
jiska78 Junior Member Join Date: Sep 2007 Posts: 4 Thanks: 1 Thanked 0 Times in 0 Posts	Bingo. Phone number needed to be the Voxalot userid. Thankyou very much for your help.