Click Here To Visit SIP Broker  

Go Back   Voxalot / SIP Broker Support Forums > Voxalot Forums > Voxalot Support

Voxalot Support Support for the Voxalot service.

 
 
Reply
Thread Tools Display Modes
Unread 02-23-2009, 06:22 PM   #1
doctorh
Member
 
doctorh's Avatar
 
Join Date: Jul 2006
Location: Winnipeg, Manitoba, Canada
Posts: 40
Thanks: 11
Thanked 5 Times in 4 Posts
doctorh is on a distinguished road
Default Problem with one way audio with Voxalot+InternetCalls

Since a couple of days, voxalot calls via Internetcalls are having one way audio.

The called party can hear me, but there is no audio coming back. I tested it with different accounts and ATAs, and all of them work OK when using Internetcalls directly but have this problem when going thru Voxalot.

Was there any change that would cause this?

Thanks,
DoctorH
doctorh is offline   Reply With Quote
Unread 02-23-2009, 10:00 PM   #2
majo
Senior Member
 
Join Date: Jun 2006
Posts: 115
Thanks: 32
Thanked 20 Times in 18 Posts
majo is on a distinguished road
Default

I had this problem with webcalldirect & I have specified stun server but even then one way audio. Now my ATA is directly connected with WCD & works.

regards.

majo
majo is offline   Reply With Quote
Unread 02-23-2009, 10:14 PM   #3
carlosalbffgomes
Senior Member
 
Join Date: May 2008
Location: Portugal and Brazil
Posts: 107
Thanks: 7
Thanked 26 Times in 21 Posts
carlosalbffgomes is on a distinguished road
Default Usually a NAT problem

Usually, the one way audio is a NAT problem.
Verify if, in Voxalot configuration, "Sym NAT" is configured to "Yes" and "Audio Optimization" is set to "No". Also, you should verify if Stun Server Configuration in your ATA is OK.
Regards,
carlosalbffgomes is offline   Reply With Quote
Unread 02-24-2009, 01:14 AM   #4
doctorh
Member
 
doctorh's Avatar
 
Join Date: Jul 2006
Location: Winnipeg, Manitoba, Canada
Posts: 40
Thanks: 11
Thanked 5 Times in 4 Posts
doctorh is on a distinguished road
Default

The problem is also happening when calling *500, no audio from Voxalot. It was working OK until last week.
doctorh is offline   Reply With Quote
Unread 02-24-2009, 01:15 AM   #5
doctorh
Member
 
doctorh's Avatar
 
Join Date: Jul 2006
Location: Winnipeg, Manitoba, Canada
Posts: 40
Thanks: 11
Thanked 5 Times in 4 Posts
doctorh is on a distinguished road
Default

Quote:
Originally Posted by majo View Post
I had this problem with webcalldirect & I have specified stun server but even then one way audio. Now my ATA is directly connected with WCD & works.

regards.

majo
Is this recent? Like since this saturday or sunday?
doctorh is offline   Reply With Quote
Unread 02-24-2009, 04:18 AM   #6
kurun
 
Join Date: Sep 2006
Location: Toronto, Canada
Posts: 568
Thanks: 70
Thanked 147 Times in 115 Posts
kurun is a jewel in the roughkurun is a jewel in the rough
Default

Which STUN server are you using?
I was using stun.voxalot.com.au but it is now no longer active.
I changed to stun.voxalot.com and my ATA (HT-496) now registers fine with no audio problems.
kurun is offline   Reply With Quote
Unread 02-24-2009, 03:06 PM   #7
doctorh
Member
 
doctorh's Avatar
 
Join Date: Jul 2006
Location: Winnipeg, Manitoba, Canada
Posts: 40
Thanks: 11
Thanked 5 Times in 4 Posts
doctorh is on a distinguished road
Default

Quote:
Originally Posted by kurun View Post
Which STUN server are you using?
I was using stun.voxalot.com.au but it is now no longer active.
I changed to stun.voxalot.com and my ATA (HT-496) now registers fine with no audio problems.
I never used any stun server, and never had any audio issues.

It started this saturday, to me and my friends using the same setup. When using internetcalls directly, no problems, but when using it via Voxalot, or when calling *500, no audio coming in in 50% of the calls.

It worked perfectly before. I tried using the stun server, and configuring the NAT parameters as per the how-to, but still, exactly the same problem, 50% of the calls failing.

Something changed at Voxalot on Saturday or Sunday that originated this problem.
doctorh is offline   Reply With Quote
Unread 02-24-2009, 04:14 PM   #8
gurlinux
Junior Member
 
Join Date: Feb 2009
Posts: 3
Thanks: 3
Thanked 0 Times in 0 Posts
gurlinux is on a distinguished road
Default Same problem here

Same problem here. I have not changed anything in the ATA configuration, it just stopped working.

I tried with the STUN server, and still nothing Has anything changed on the Voxalot side over the weekend?
gurlinux is offline   Reply With Quote
Unread 02-24-2009, 10:00 PM   #9
carlosalbffgomes
Senior Member
 
Join Date: May 2008
Location: Portugal and Brazil
Posts: 107
Thanks: 7
Thanked 26 Times in 21 Posts
carlosalbffgomes is on a distinguished road
Default SRV DNS Change

After EU Server being down for 4 or 5 days, there was a change in the SRV DNS entries for Voxalot. This change was made to permit an automatic server backup if some of the servers stops working. You can see the DNS SRV entries if you type in the console the following command:

# host -t srv _sip._udp.us.voxalot.com

(you may change the 'us' portion with 'eu' ou 'au').

This is the unique change I know that have been done in the last week.
Regards,
carlosalbffgomes is offline   Reply With Quote
Unread 02-25-2009, 07:44 AM   #10
boatman
Senior Member
 
boatman's Avatar
 
Join Date: Jul 2007
Location: Oregon, USA
Posts: 365
Thanks: 17
Thanked 77 Times in 64 Posts
boatman is on a distinguished road
Default

Quote:
Originally Posted by gurlinux View Post
Same problem here. I have not changed anything in the ATA configuration, it just stopped working.
Here is a quick test you can do; Call *0@proxy01.sipphone.com and listen to what the recorded message says. Make the call directly from your SIP user agent, not through SIpBroker or another route. If you hear "you are behind a sip compatible router" then your NAT settings may be OK. If you hear "you may experience call completion problems behind this router" that means you are sending an incorrectly constructed SDP packet.
boatman is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough ctylor Voxalot General 5 04-28-2010 12:52 AM
New user problems with Call Connection Rules bdlhome Voxalot Support 12 09-10-2008 02:19 AM
VoXaLot not working with PBXes (VoXaLot as an extension of PBXes) wilsonhlacerda Voxalot Support 31 12-09-2007 02:30 PM
problem using voxalot using hardware but works with softphone xlite ahmed24 Voxalot Support 1 01-07-2007 11:59 PM
Newbie - but please be nice Mallycat Voxalot Support 21 04-15-2006 07:50 AM


All times are GMT. The time now is 03:54 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.