SIP Broker Access Numbers - Status Thread - Page 3

hust · 09-26-2007, 07:11 AM

Quote:

Originally Posted by dwC

Hello all,

Just an FYI to everyone that Link2Voip has provided SIPBroker with a secondary Vancouver, Canada PSTN DID.

Cheers,

dwC

i am in Vancouver now, call sip acccess number 604-628-4266, encountering busy tone. call 604-630-9700, it does not work.

hust · 10-12-2007, 01:01 PM

Quote:

Originally Posted by hust

i am in Vancouver now, call sip acccess number 604-628-4266, encountering busy tone. call 604-630-9700, it does not work.

I have forgotten to say that sip broker access number 604-628-4266 worked normally when i returned to Vancouver on OCT,4,2007.

StanBarber · 10-13-2007, 10:44 PM

I am having problems dialing SIP Broker PSTN access numbers with my ENUM number.

I have tried all these numbers:

San Antonio, TX 1-210-881-0442
San Francisco, CA 1-415-376-7297
San Francisco, CA 1-415-594-0355
San Jose, CA 1-408-538-2197
San Jose, CA 1-408-625-4997
Tulsa, OK 1-918-398-9841
San Mateo, CA 1-650-523-6897
San Rafael, CA 1-415-223-4197
Michigan 1-616-608-0509

After the prompt, I enter my ENUM
*013 882 9999 nnn nnn#

This now just gives me a busy tone. (Not 1-way audio. No ringing on either side. Just a busy signal.)

I have used these PSTN numbers with my ENUM for several months with NO problems.
I have not made any changes to my firewall and ATA.

So I had my friends do the same thing with these and other SIP Broker PSTN numbers and their own ENUMs.
Same results. Busy tone.

What is going on?

martin · 10-13-2007, 11:00 PM

Did you try SIPBroker - ENUM Lookup

Please PM me the ENUM number you are calling.

I just tried some numbers and got timeouts against e164.org:

e164.arpa.(3ms) ---Not Found---
e164.org.(5000ms) ---Timed Out---
e164.info.(11ms) ---Not Found---
e164.televolution.net.(2ms) ---Not Found---
enum.org.(2ms) ---Not Found---

Hopefully evilbunny can shed some light on this problem.

StanBarber · 10-13-2007, 11:31 PM

Thanks Martin.

I tried the SIPBroker - ENUM Lookup with
882 9999 nnn nnn

I got the results:
e164.arpa.(4ms) ---Not Found---
e164.org.(1076ms) sip: (yes this is the correct lookup entry)
e164.info.(12ms) ---Not Found---
e164.televolution.net.(83ms) ---Not Found---
enum.org.(2ms) ---Not Found---

So I have been dialing
*013 882 9999 nnn nnn#
This has not been working recently.

BUT considering the above lookup, I tried:
882 9999 nnn nnn#
and it works!
Now my end points are ringing and I am talking again. No problems.

So removing the initial *013 is what it took to make it work (again).
Why is that?
And why was it working before with the *013 ?

Do you still want me to PM you my ENUM ?

martin · 10-14-2007, 12:25 AM

Please try the *013 number again and PM my the exact number you dialed and I will check the logs.
.

dc2007 · 10-17-2007, 04:25 PM

the one in china keeps going to my vm now.it used to work smoothly and rings my ata.

tremmarc · 10-18-2007, 11:42 PM

Hello!

Ive discovered about sip broker accidantly and recently, and ive tried to dial PTSN in muinch germany, but from different country. When dialing the number from land line, i get msg all circuits are busy now, and immediately after i got disconnected.

Does that means that only ppls from Germany/Munich can call the number or the ptsn number is closed?

The number i dialed is :+49-89-121409114

If the number is dead is there a chance to get new number in Munich?

Thanks to everyone, and cheers!

emoci · 10-18-2007, 11:53 PM

Quote:

Originally Posted by tremmarc

Hello!

Ive discovered about sip broker accidantly and recently, and ive tried to dial PTSN in muinch germany, but from different country. When dialing the number from land line, i get msg all circuits are busy now, and immediately after i got disconnected.

Does that means that only ppls from Germany/Munich can call the number or the ptsn number is closed?

The number i dialed is :+49-89-121409114

If the number is dead is there a chance to get new number in Munich?

Thanks to everyone, and cheers!

None of the numbers are limited to people from a certain region...however you are right that the Munich number is down (just tested).... Maybe Martin can get in touch with SipService

tremmarc · 10-19-2007, 12:53 AM

@emoci thanks for prompt answer, really apprechiate it. That would be perfect if Martin can get ahold of Sipservice that would be perfect! Lets wait for Martin.

I believe he will have great and positive answer.

Thanks, for clearing this up for me!

Cheers!

10-13-2007, 11:00 PM	#24
martin Join Date: Feb 2006 Posts: 2,930 Thanks: 528 Thanked 646 Times in 340 Posts	Did you try SIPBroker - ENUM Lookup Please PM me the ENUM number you are calling. I just tried some numbers and got timeouts against e164.org: e164.arpa.(3ms) ---Not Found--- e164.org.(5000ms) ---Timed Out--- e164.info.(11ms) ---Not Found--- e164.televolution.net.(2ms) ---Not Found--- enum.org.(2ms) ---Not Found--- Hopefully evilbunny can shed some light on this problem. __________________ Martin Please post support questions on the forum. Do not send PMs unless requested.

10-14-2007, 12:25 AM	#26
martin Join Date: Feb 2006 Posts: 2,930 Thanks: 528 Thanked 646 Times in 340 Posts	Please try the 013 number again and PM my the exact number you dialed and I will check the logs. . __________________ Martin Please post support questions on the forum. Do not send PMs unless requested.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Free DID Numbers, Free Voip Calls, & more Voip Info	amroe	Voxalot General	54	01-13-2014 09:11 AM
PSTN Access numbers and my DTMF	yfm	SIP Broker Support	5	12-09-2007 06:51 PM
SIP Broker Access Numbers and Dail Tone	yfm	SIP Broker Support	2	07-15-2007 02:45 AM
what service offer free access numbers?	wycodreams	SIP Broker Support	4	04-30-2007 04:13 PM
please explain sip-broker for beginners	bitbonk	SIP Broker Support	7	03-29-2007 02:05 AM

10-13-2007, 10:44 PM	#23
StanBarber Junior Member Join Date: May 2007 Posts: 10 Thanks: 3 Thanked 0 Times in 0 Posts	I am having problems dialing SIP Broker PSTN access numbers with my ENUM number. I have tried all these numbers: San Antonio, TX 1-210-881-0442 San Francisco, CA 1-415-376-7297 San Francisco, CA 1-415-594-0355 San Jose, CA 1-408-538-2197 San Jose, CA 1-408-625-4997 Tulsa, OK 1-918-398-9841 San Mateo, CA 1-650-523-6897 San Rafael, CA 1-415-223-4197 Michigan 1-616-608-0509 After the prompt, I enter my ENUM *013 882 9999 nnn nnn# This now just gives me a busy tone. (Not 1-way audio. No ringing on either side. Just a busy signal.) I have used these PSTN numbers with my ENUM for several months with NO problems. I have not made any changes to my firewall and ATA. So I had my friends do the same thing with these and other SIP Broker PSTN numbers and their own ENUMs. Same results. Busy tone. What is going on?

10-13-2007, 11:31 PM	#25
StanBarber Junior Member Join Date: May 2007 Posts: 10 Thanks: 3 Thanked 0 Times in 0 Posts	Thanks Martin. I tried the SIPBroker - ENUM Lookup with 882 9999 nnn nnn I got the results: e164.arpa.(4ms) ---Not Found--- e164.org.(1076ms) sip: (yes this is the correct lookup entry) e164.info.(12ms) ---Not Found--- e164.televolution.net.(83ms) ---Not Found--- enum.org.(2ms) ---Not Found--- So I have been dialing 013 882 9999 nnn nnn# This has not been working recently. BUT considering the above lookup, I tried: 882 9999 nnn nnn# and it works! Now my end points are ringing and I am talking again. No problems. So removing the initial 013 is what it took to make it work (again). Why is that? And why was it working before with the *013 ? Do you still want me to PM you my ENUM ?

10-17-2007, 04:25 PM	#27
dc2007 Member Join Date: Mar 2007 Posts: 81 Thanks: 12 Thanked 1 Times in 1 Posts	the one in china keeps going to my vm now.it used to work smoothly and rings my ata.

10-18-2007, 11:42 PM	#28
tremmarc Junior Member Join Date: Oct 2007 Posts: 16 Thanks: 3 Thanked 1 Times in 1 Posts	Hello! Ive discovered about sip broker accidantly and recently, and ive tried to dial PTSN in muinch germany, but from different country. When dialing the number from land line, i get msg all circuits are busy now, and immediately after i got disconnected. Does that means that only ppls from Germany/Munich can call the number or the ptsn number is closed? The number i dialed is :+49-89-121409114 If the number is dead is there a chance to get new number in Munich? Thanks to everyone, and cheers!

10-19-2007, 12:53 AM	#30
tremmarc Junior Member Join Date: Oct 2007 Posts: 16 Thanks: 3 Thanked 1 Times in 1 Posts	@emoci thanks for prompt answer, really apprechiate it. That would be perfect if Martin can get ahold of Sipservice that would be perfect! Lets wait for Martin. I believe he will have great and positive answer. Thanks, for clearing this up for me! Cheers!