![]() |
|
Voxalot Support Support for the Voxalot service. |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Apr 2007
Posts: 2
Thanks: 0 Thanked 0 Times in 0 Posts ![]() |
![]() Hi all,
Ok got part of this all figured out so far. that i have my ata registered with voxalot. can dial test numbers. Here is the problem i run into: If i use the Web Callback it works fine when i put my number in there and select sip broker and the next line i put the number i want to call which say my cell phone and use the company i have set for calling out. Works with no problem. But now if i use the ATA and try dialing the same number nothing just sits there. So not even sure i have everything pluged where it should be. Here is the setup i have: Under Dial Plans i have the following 40 _011NX ${EXTEN} sip.voiparound.com 999 _1NXXNXXXXXX ${EXTEN} sip.voiparound.com Also i am set up with ENUM so not sure on how to get it to show the number i am calling from to show on caller id's. Provider: is registered with no problems. using the following in there: ulaw;alaw;g726;g729;ilbc;gsm provider is sip.voiparound.com Dialplan on the ATA is: (*[56]00S0 |*xxx[x*]. |x |*xx |1[89]76x.! |1[79]00x.! |1[2-9]xx[2-9]xxxxxxS0 |#x1[2-9]xx[2-9]xxxxxxS0 |011xx. |411S0 |<:1814>[2-9]xxxxxxS0 |#x<:1814>[2-9]xxxxxxS0 ) Even tried the [x*][x*]. dial string. Now i did setup a speedial **1 and that will work fine from calling from the ata to the cell phone. Is there something i am missing? In other words what i am trying to do is have the ATA when i pick the line up and say dial 18145551212 go via the provider i have or is it something missing in my dial string? or any area code phone number. has to be something i am missing in the above somewhere for when i pick up the phone and dial a number for it to go via voiparound.com. Only using the voiparound.com for dialing reg phone lines for right now. As for the call forwarding on Voxalot that works fine also telling to to forward all calls to voiparound.com with my cell and it will dial my fax number but no caller id also. Thanks. Last edited by lokky; 04-26-2007 at 09:40 PM. |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Apr 2007
Posts: 2
Thanks: 0 Thanked 0 Times in 0 Posts ![]() |
![]() I have the ata working fine that I got dialtone and can do test numbers with no problems.
Using the dial plan I have set allows me to call out to PSTN number using one of the providers I have, Here is what my dial plan looks like: As in number 1. I have it set that if i dial a 1 and anything after it will go out via the freedial i am using. 1 _1. ${EXTEN} Free Call Yes pattern _1. replacement ${EXTEN} Enum Replacement ${EXTEN} Enum lookup no provider freedial 999 _1NXXNXXXXXX ${EXTEN} VoXaLot Yes pattern __1NXXNXXXXXX replacement ${EXTEN} Enum Replacement ${EXTEN} Enum lookup no sipbroker Here is the problem i run into: Now if say I wanted to dial a sip address for some reason that will no go out at all not sure what I have messed up in the above dialplan. Also i am set up with ENUM so not sure on how to get it to show the number i am calling from to show on caller id's. Dialplan on the ATA is: [x*][x*]. Have tried the below didn’t want to work well. (*[56]00S0 |*xxx[x*]. |x |*xx |1[89]76x.! |1[79]00x.! |1[2-9]xx[2-9]xxxxxxS0 |#x1[2-9]xx[2-9]xxxxxxS0 |011xx. |411S0 |<:1814>[2-9]xxxxxxS0 |#x<:1814>[2-9]xxxxxxS0 ) Is there something i am missing? Thanks. Last edited by lokky; 04-27-2007 at 04:05 PM. |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to use ENUM | jadangomez | e164.org Support | 5 | 05-15-2007 03:08 AM |
Newbie - UK dialing plan help please? | petercfoy | Voxalot Support | 2 | 04-16-2007 01:06 PM |
Qn From Newbie: PSTN message bank | Chumby | Voxalot Support | 5 | 03-26-2007 06:25 AM |
Newbie - Can't get outgoing calls to work | alan99 | Voxalot Support | 3 | 02-05-2007 10:36 PM |
Newbie - but please be nice | Mallycat | Voxalot Support | 21 | 04-15-2006 07:50 AM |