Using a local provider

Tranworld · 02-23-2007, 02:59 AM

I am unable to make a local provider work with Voxalot. This provider is www.aglow.sg and works well with my Linksys device, both a PAP2NA and a SPA3102, I can use it both as registered or as a GW3 in the SPA3102, only to be called upon to dial out through the dial plan.

However trying a dial plan in Voxalot and this provider does not work, I have

_1xx. to a provider with a prefix so 0061${EXTEN:1}
_2xx. to Aglow with ${EXTEN:1}

Dialling 1 and a local number will get the 1st one work. but dialling 2 will get an eventual engaged tone. the SIP proxy is sip.aglow.com. There is no fancy config with this provider.

Any helps appreciated
[typo fixed, see below if more info. required]

affinity · 02-23-2007, 03:20 AM

your second entry should be:
_2xx. ${EXTEN:1}
otherwise the first digit you dial after the 2 is lost.

Tranworld · 02-23-2007, 03:25 AM

Thanks it was a typo, yes indeed it was ${EXTEN:1}

Tranworld · 02-23-2007, 03:27 AM

In fact I have tested it with a much simpler dial plan to avoid mistake, something like _xxxxxxxx and no EXTEN as it is exactly how it should be dialled

affinity · 02-23-2007, 03:36 AM

Quote:

Originally Posted by Tranworld

In fact I have tested it with a much simpler dial plan to avoid mistake, something like _xxxxxxxx and no EXTEN as it is exactly how it should be dialled

Okay then, use ${EXTEN} and that will pass the number exactly as entered. Also do a test on the dial plan screen to make sure it routes as expected.

affinity · 02-23-2007, 03:32 AM

Okay, does the second provider have any test numbers that you can ring? Perhaps they have a requirement to be have SIP register set to true or they otherwise don't work with voxalot properly. What is the URL of aglow?

Tranworld · 02-23-2007, 03:39 AM

There is no test number but it is easy to test since I used it everyday with my 3102, on the Linksys they do not have to be registered to work, I have the 3102 line registered with sipphone.com and only invoke this VSP via dial plan and gateway function of the 3102.

This provider is mainly for dialling PSTN and it also has an incoming PSTN number, it is not a big community like FWD where we can dial each other

Tranworld · 02-23-2007, 03:39 AM

The URL is SIP.AGLOW.SG the website is WWW.AGLOW.SG

02-23-2007, 02:59 AM	#1
Tranworld Senior Member Join Date: Feb 2007 Posts: 128 Thanks: 1 Thanked 5 Times in 4 Posts	Using a local provider I am unable to make a local provider work with Voxalot. This provider is www.aglow.sg and works well with my Linksys device, both a PAP2NA and a SPA3102, I can use it both as registered or as a GW3 in the SPA3102, only to be called upon to dial out through the dial plan. However trying a dial plan in Voxalot and this provider does not work, I have _1xx. to a provider with a prefix so 0061${EXTEN:1} _2xx. to Aglow with ${EXTEN:1} Dialling 1 and a local number will get the 1st one work. but dialling 2 will get an eventual engaged tone. the SIP proxy is sip.aglow.com. There is no fancy config with this provider. Any helps appreciated [typo fixed, see below if more info. required] Last edited by affinity; 02-23-2007 at 03:28 AM. Reason: adjusted to correct info, fixed the typo

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough	ctylor	Voxalot General	5	04-28-2010 12:52 AM
Using same provider in two Voxalot accounts	clundestad	Voxalot Support	1	04-20-2007 11:32 AM
Provider does not unregister	xisdn	Voxalot Support	2	07-03-2006 11:31 AM

02-23-2007, 03:20 AM	#2
affinity Join Date: Apr 2006 Posts: 799 Thanks: 66 Thanked 61 Times in 44 Posts	your second entry should be: _2xx. ${EXTEN:1} otherwise the first digit you dial after the 2 is lost.

02-23-2007, 03:25 AM	#3
Tranworld Senior Member Join Date: Feb 2007 Posts: 128 Thanks: 1 Thanked 5 Times in 4 Posts	Thanks it was a typo, yes indeed it was ${EXTEN:1}

02-23-2007, 03:27 AM	#4
Tranworld Senior Member Join Date: Feb 2007 Posts: 128 Thanks: 1 Thanked 5 Times in 4 Posts	In fact I have tested it with a much simpler dial plan to avoid mistake, something like _xxxxxxxx and no EXTEN as it is exactly how it should be dialled

02-23-2007, 03:32 AM	#6
affinity Join Date: Apr 2006 Posts: 799 Thanks: 66 Thanked 61 Times in 44 Posts	Okay, does the second provider have any test numbers that you can ring? Perhaps they have a requirement to be have SIP register set to true or they otherwise don't work with voxalot properly. What is the URL of aglow?

02-23-2007, 03:39 AM	#7
Tranworld Senior Member Join Date: Feb 2007 Posts: 128 Thanks: 1 Thanked 5 Times in 4 Posts	There is no test number but it is easy to test since I used it everyday with my 3102, on the Linksys they do not have to be registered to work, I have the 3102 line registered with sipphone.com and only invoke this VSP via dial plan and gateway function of the 3102. This provider is mainly for dialling PSTN and it also has an incoming PSTN number, it is not a big community like FWD where we can dial each other