Supported SIP Proxy Ports - Page 3

emoci · 06-25-2008, 01:14 PM

Try using 80 or 443 and see if anything changes

Also, if the provider you are using has been set with Optimize Audio to Yes, set this to No and see if that helps...

I suspect that when calling out, especially if Optimize Audio is set to Yes, the SIP ReInvite is using 5060...hence your issues

than30fyl · 06-26-2008, 04:31 PM

Dear emoci,

Thank you for your help.

I've tried ports 80 and 443 and give the same as 2060.

Optimize Audio Path is set to NO
NAT Handling is set to YES.

I get a connection to any provider i have available in my voxalot account, (through my dialing plans), the connection operates flawlessly for 21 seconds and then sudenly disconnects!

I see other users referring to this in previous posts in this same thread.

Any help is apreciated.
Best Regards,
~thanasis.

emoci · 06-26-2008, 07:23 PM

Quote:

Originally Posted by than30fyl

Dear emoci,

Thank you for your help.

I've tried ports 80 and 443 and give the same as 2060.

Optimize Audio Path is set to NO
NAT Handling is set to YES.

I get a connection to any provider i have available in my voxalot account, (through my dialing plans), the connection operates flawlessly for 21 seconds and then sudenly disconnects!

I see other users referring to this in previous posts in this same thread.

Any help is apreciated.
Best Regards,
~thanasis.

Ok, how about NAT routing, especially STUN setup:

I am not familiar with the Fritzbox but here is a few things to consider: http://forum.voxalot.com/voxalot-sup...html#post14452

fauday · 10-30-2008, 07:01 PM

Thanks for multiple sip proxy ports.

aftercoffee · 04-17-2009, 04:34 PM

Can anyone please confirm port 80 and 443? I seem to have trouble with those two and 3060 4060 5060 work fine. Want to make sure if its something from my end. Thanks...

aleisorek · 07-28-2009, 09:00 AM

Hello,

I am using d2.spikko.com proxy and they require port SIP 5090. I've configured my service provider list with port 5090 and I see status Registered. When I call my number on this I get a regular dialing tone but my telephone (connected to my SPA-3102 does not ring at all and I can not make calls using Spikko provider.

I see SIP ports 80, 443, XX60 are open on voxalot side so I assumed I would not even see Registred status when using 5090.

Does anyone has had experience with Spikko VSP? From some internet threads I found there seems to be some problem with Asterisk servers using port 5090, but then again I do not have enough experience nor information.

BTW, when I configure my soft-phone (SJPhone) using same parameters it does work perfectly.

Any ideas?

Thanks.

ilanesh · 08-06-2009, 08:48 PM

I try to use spikko, but I try all combinations, it always gives me this:
spikko, fetching registrations failed: 503 Service Unavailable

so I can`t use it, it is notregistering on twinkle and not on x-lite.
someone can help please?

emoci · 08-06-2009, 10:37 PM

Quote:

Originally Posted by ilanesh

I try to use spikko, but I try all combinations, it always gives me this:
spikko, fetching registrations failed: 503 Service Unavailable

so I can`t use it, it is notregistering on twinkle and not on x-lite.
someone can help please?

As far as I can tell Spikko connot be used via SIP at the moment. Having tried myself with VoXalot, MySipSwitch or a SoftPhone...nothing seems to work ...

I realize there are a few articles that claim otherwise...but they are a bit dated...

ilanesh · 08-14-2009, 02:45 PM

yes, they write on their site it will work with ATA sip and also on x-lite it is logged in and on sipsorcery too, but I do not know how to make a test call, they made it very complicated to do a call from a regular cellphone, this costs me too much money to try test calls and only the voicemail is answerin,g and then they ask for a number i just do not understand why it is impossible to call direct to the spikkophone number I got from them, even no forum there.

JakDac · 09-24-2009, 02:57 AM

Cannot register my v100 to voxalot was working for years registers when I change to MNF but no success on the ATA with Voxalot ( is registering on x-lite softphone ? Any problems at voxalot ? any solution

Ta Jak

07-28-2009, 09:00 AM	#6
aleisorek Junior Member Join Date: Nov 2006 Location: Israel Posts: 14 Thanks: 2 Thanked 0 Times in 0 Posts	SIP port 5090 for d2.spikko.com Hello, I am using d2.spikko.com proxy and they require port SIP 5090. I've configured my service provider list with port 5090 and I see status Registered. When I call my number on this I get a regular dialing tone but my telephone (connected to my SPA-3102 does not ring at all and I can not make calls using Spikko provider. I see SIP ports 80, 443, XX60 are open on voxalot side so I assumed I would not even see Registred status when using 5090. Does anyone has had experience with Spikko VSP? From some internet threads I found there seems to be some problem with Asterisk servers using port 5090, but then again I do not have enough experience nor information. BTW, when I configure my soft-phone (SJPhone) using same parameters it does work perfectly. Any ideas? Thanks.

09-24-2009, 02:57 AM	#10
JakDac Junior Member Join Date: Dec 2007 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Cannot register my v100 to voxalot was working for years registers when I change to M Cannot register my v100 to voxalot was working for years registers when I change to MNF but no success on the ATA with Voxalot ( is registering on x-lite softphone ? Any problems at voxalot ? any solution Ta Jak

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HowTo: 6 Steps To Tune Your Voice Quality	martin	Voxalot Tips, Tricks & HowTo's	13	12-27-2010 11:36 AM
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough	ctylor	Voxalot General	5	04-28-2010 12:52 AM
Provider with Outbound Proxy?	MrHatken	Voxalot Support	14	03-07-2008 05:02 AM
incoming calls to my voxalot number without sound	wycodreams	Voxalot General	22	10-04-2007 05:35 PM

06-25-2008, 01:14 PM	#1
emoci Join Date: Jul 2007 Location: Toronto, Canada Posts: 1,422 Thanks: 123 Thanked 369 Times in 282 Posts	Try using 80 or 443 and see if anything changes Also, if the provider you are using has been set with Optimize Audio to Yes, set this to No and see if that helps... I suspect that when calling out, especially if Optimize Audio is set to Yes, the SIP ReInvite is using 5060...hence your issues

06-26-2008, 04:31 PM	#2
than30fyl Junior Member Join Date: Apr 2008 Location: Thessaloniki Posts: 8 Thanks: 0 Thanked 1 Times in 1 Posts	Dear emoci, Thank you for your help. I've tried ports 80 and 443 and give the same as 2060. Optimize Audio Path is set to NO NAT Handling is set to YES. I get a connection to any provider i have available in my voxalot account, (through my dialing plans), the connection operates flawlessly for 21 seconds and then sudenly disconnects! I see other users referring to this in previous posts in this same thread. Any help is apreciated. Best Regards, ~thanasis.

10-30-2008, 07:01 PM	#4
fauday Junior Member Join Date: Oct 2008 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks for multiple sip proxy ports.

04-17-2009, 04:34 PM	#5
aftercoffee Junior Member Join Date: Apr 2009 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Can anyone please confirm port 80 and 443? I seem to have trouble with those two and 3060 4060 5060 work fine. Want to make sure if its something from my end. Thanks...

08-06-2009, 08:48 PM	#7
ilanesh Junior Member Join Date: Mar 2007 Posts: 10 Thanks: 0 Thanked 1 Times in 1 Posts	I try to use spikko, but I try all combinations, it always gives me this: spikko, fetching registrations failed: 503 Service Unavailable so I can`t use it, it is notregistering on twinkle and not on x-lite. someone can help please?

08-14-2009, 02:45 PM	#9
ilanesh Junior Member Join Date: Mar 2007 Posts: 10 Thanks: 0 Thanked 1 Times in 1 Posts	yes, they write on their site it will work with ATA sip and also on x-lite it is logged in and on sipsorcery too, but I do not know how to make a test call, they made it very complicated to do a call from a regular cellphone, this costs me too much money to try test calls and only the voicemail is answerin,g and then they ask for a number i just do not understand why it is impossible to call direct to the spikkophone number I got from them, even no forum there.