|
Voxalot Support Support for the Voxalot service. |
Thread Tools | Display Modes |
03-08-2007, 05:02 AM | #1 |
Member
|
Port 5061, Linksys WRT54GP2
Hi, I too can't get my box to register with Voxalot.
I am trying to set up Voxalot on my second line / port of my Linksys WRT54GP2. It's port number is 5061. Port 5060 is being used by my engin account on the first line / port of the router. Is this whats stopping things from registering? The fact that I am trying to use port 5061? And no I don't want to put voxalot on the 5060 port and then run engin through voxalot. For now I just want to get it all running on the second line and understand it all and refine the setup before I muck with whats working on the first line. Any help appreciated. .-.-. |
03-08-2007, 05:29 AM | #2 |
Join Date: Feb 2006
Posts: 2,930
Thanks: 528 Thanked 646 Times in 340 Posts |
The port within your Linksys defines the port for inbound messages into your device.
5061 is fine for line 2 and in fact is usually what most people set up. Even if you setup 5061 in your device, you must still point your outbounds to 5060 on any of the VoXaLot servers (or 4060, 3060, 2060 as this post outlines). If you are having problems registering I would suggest posting a screen capture of your settings.
__________________
Martin Please post support questions on the forum. Do not send PMs unless requested. |
03-08-2007, 06:01 AM | #3 | |
Member
|
Quote:
Posting a screen capture sounds like a good idea. Thanks. The next trick is working out how to do this. I tried a cut and past, but it doesn't show the settings. Only the headings. Can you recomend a format for doing this please? I am asuming I need some sort of software to capture the screen, and then I will need to find a free web site that allows you to post images? If so please suggest software / site to use. Thanks for your help. .-.-. |
|
03-08-2007, 06:03 AM | #4 | |
Join Date: Feb 2006
Posts: 2,930
Thanks: 528 Thanked 646 Times in 340 Posts |
Quote:
__________________
Martin Please post support questions on the forum. Do not send PMs unless requested. |
|
03-08-2007, 06:26 AM | #5 | |
Member
|
Quote:
Thanks for this. I've been mucking with this thing for days with no success. OK. Done, attached is a screen capture of my second port that I am trying to set up for Voxalot. Sorry about the image quality but I had to compress it to below 97k for the site to accept it. TNX .-.-. |
|
03-08-2007, 08:03 AM | #6 |
Join Date: Feb 2006
Posts: 2,930
Thanks: 528 Thanked 646 Times in 340 Posts |
Try changing the "Register Expires" field to a value between 900-3600
__________________
Martin Please post support questions on the forum. Do not send PMs unless requested. |
03-08-2007, 08:42 AM | #7 |
Member
|
|
03-08-2007, 08:46 AM | #8 | |
Join Date: Feb 2006
Posts: 2,930
Thanks: 528 Thanked 646 Times in 340 Posts |
Quote:
Out of curiosity are you allowing 5061 inbounds into your device. There isn't a firewall rule blocking inbound UDP on port 5061?
__________________
Martin Please post support questions on the forum. Do not send PMs unless requested. |
|
03-08-2007, 08:59 AM | #9 | |
Member
|
Quote:
The only two spots in the config I can see for port numbers is: Sip Port: 5061 ( I asume this is the inbound port) & Ext Sip Port: [Blank] (I have no idea what htis field is for) I have also tried entering 5060 and 5061 into both these fields in all the combinations possible. No Joy. .-.-. |
|
03-08-2007, 09:07 AM | #10 |
Join Date: Feb 2006
Posts: 2,930
Thanks: 528 Thanked 646 Times in 340 Posts |
I'm not familiar with this device. A couple of other settings to try:
1. Change USE DNS SRV and DNS SRV Auto prefix to "No" 2. Try us.voxalot.com instead of au.voxalot.com (as a test only).
__________________
Martin Please post support questions on the forum. Do not send PMs unless requested. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough | ctylor | Voxalot General | 5 | 04-28-2010 12:52 AM |
Different port setup | Luc | SIP Broker Support | 6 | 07-13-2007 11:05 PM |
Linksys WRT54GP2 config Help needed PSE? | vk4akp | Voxalot Support | 2 | 03-18-2007 02:42 PM |
Probably port mapping problems | 340742 | Voxalot Support | 0 | 03-01-2007 05:50 PM |
Using a 2 port ATA with Voxalot | jenalcom | Voxalot Support | 16 | 02-03-2007 06:37 AM |