Sip2Skype Via Net2Max

[richard99]

The setup is working very good and calls get through to Skype. Is it possible to configure and call out more then one Skype account in this setup.

[emoci]

Originally Posted by richard99

The setup is working very good and calls get through to Skype. Is it possible to configure and call out more then one Skype account in this setup.

Theoretically yes....practically it gets complicated...

In Net2Max there is an InternetPhone button, and a SIP Phone option in that menu...if you reach that menu, and you actually have codecs enabled (meaning you can register Net2Max with a SIP Device then things should work)....I say this because it seems depending on how your acct. was setup, at least for me (and I wrote the guide) the codecs never seem to get enabled...

In any case, if you can manage to use Net2Max via sip, you could then add it as provider in VoXalot for example (just outgoing calls)...You can then create Speed Dials of the sort 099SkypeName via Net2Max for multiple Skype Users (Speed Dials in VoXalot)

Hope that gets you started...

[snuggles]

Hi Emoci,

Thank you very much for the great guide on creating a sip address for a skype account. This is so helpful because the Skype app for Android has so much better sound quality than any other SIP softphone for Android (including Sipdroid, CSipSimple and 3CX). Basically you created a SkypeIn this way.

I would love to be able to also make some kind of SkypeOut to my PBX (pbxes.org); I have been looking for ways on how to be able to make an outgoing call using my Skype softphone to my PBX so I can call a phone number or sip address. Unfortunately there is no possibility to create a trunk to Skype from PBXes.org. Do you perhaps know of any online PBX or site where I would be able to do that?
Ideally I could make a skype call to an account that has my PBX (now pbxes.org) behind it. Do you know a workaround, perhaps through a callback service? Having the PBX initiate a call to both parties?
I don't want to keep a server running at home yet, setting up an entire PBX and then having to have to box running all the time is not my cup of tea (yet), and so far this is the only way I see of doing it.

Any advice?

Thanks a lot again for the help you have already given (the guide).

Snuggles

[Grahame]

Hi emoci,

You mentioned in your last post you wrote a guide vis a viz Net2Max/Voxalot.

Is such a guide still available ?

I'm thinking of using Net2Max and need all the help I can get.

Best regards

Grahame

[emoci]

Take a look at:

Sip2Skype: Receiving SIP Calls in Skype
Skype CallThru: Using your Skype Plan (Unlimited or Pro) Remotely to make calls form CellPhones and Landlines

[jagdev78]

Hi emoci I want say thanks thats working good. But it ring after about 15sec to my skype is there any help for that

[fuzzuy]

Originally Posted by emoci

Take a look at:

Sip2Skype: Receiving SIP Calls in Skype
Skype CallThru: Using your Skype Plan (Unlimited or Pro) Remotely to make calls form CellPhones and Landlines

Hi Emoci,

Thanks for the guide there i have setup two accounts with that guide and working fine butg now i try to setup another account for my friend than i run in to problems first they won't register from any Canadian or US number i tried various number no luck so I end up asking my frined in sydney who register an account for me so i log in to that account now but when i go to step 10

10. Click on Access Number, and make sure calls are sent to Web PABX (note your Verified Number as well):

Now in my new account i don't see this option any more so not sure how can i get that, but when i looked on my old account that option is there so i am confused can you help me here please and thank you .

[emoci]

I have not checked in on Net2Max in a while....and I may not have time to check in the next little while. That said life has gotten much easier with Skype...where you may not even need Net2Max.

To receive SIP Calls in Skype simply use the following SIP URI format (no setup required):
*883975*SkypeUser@sipbroker.com

So let's say your Skype Username was fuzzuy...then you would use this SIP URI:
*883975*fuzzuy@sipbroker.com (all possible thanks to SipCode Brasil - Home)

Now you can't really call *883975*fuzzuy from a SipBroker access number (the username has letters which you can't dial). But you can set yourself up with a SipBroker Alias .... or better yet get yourself an INum number and point it to that SIP URI above.

Hope that helps

PS. INum numbers can now be called for free from Skype and GoogleVoice.

[fuzzuy]

You are awesome and thanks very much yes with this life is easy and it works like a charm much appreciated

[Grahame]

Hi emoci,

Thanks for the links, I have seen them regarding Skype but this not really my interest.

I was mainly interested in any general info regarding Net2Max capabilities/usage with Voxalot. I appreciate this might cover volumes but any general info would be gratefully received.

Best regards

Grahame