Call drops every 3 to 5 minutes - Page 2

calvin_baank · 08-02-2007, 02:46 PM

have same problem again

calvin_baank · 08-02-2007, 02:58 PM

when it drops. i just don't get packets anymore... any idea?

calvin_baank · 08-03-2007, 01:34 PM

i think this is a blocked port issue.

I debug the ATA. and i see that the server still send from port 5060 if though you connect on port 3060 to the server.

I don't know if somebody can tell me anything.
I'm gettting 408 request time out

calvin_baank · 08-03-2007, 03:09 PM

With x-lite everything works fine..
I dont know what's going on.

Possible my PAP2 is not good?

kurun · 08-03-2007, 05:54 PM

Quote:

Originally Posted by calvin_baank

With x-lite everything works fine..

That comment triggers a question. Are you using a STUN server setting in your PAP-2 ?

bokaroseani · 08-03-2007, 09:11 PM

On my Dlink DVG1402S, when I change the SIP server port to 5063 the router does not even register with Voxalot server. So I changed it back to 5060. But I tried changing the user agent port to 5063 and then the router can register with voxalot but it does not help with my call dropping problem around every 5 minutes.

I could not find any settings for impedence and all in my router. So did not try that suggestion yet.

bokaroseani · 08-04-2007, 12:49 PM

I might just have solved my problem. I made a 12 minute call without disruption. What I did was to change the SIP server port to 4060 instead of 5060 and everything works fine so far. No more calls getting dropped at least in the three over-12minutes calls that I made after making this change in the router config. Might be my internet service provider is cutting the calls after around 5 minutes when using port 5060.

starun · 10-15-2007, 01:18 PM

Same problem persists! Whatever ports I change to (2060, 3060, 4060) in my SPA-942, calls drop after 30 secs or less. And yes, with XLite is works all fine. And stun server is stun.xten.com

Any suggestions?

martin · 10-15-2007, 01:38 PM

Quote:

Originally Posted by starun

Same problem persists! Whatever ports I change to (2060, 3060, 4060) in my SPA-942, calls drop after 30 secs or less. And yes, with XLite is works all fine. And stun server is stun.xten.com

Any suggestions?

Could be a re-invite issue with the Sipura retrying on 5060

Is there a setting in the phone to disable SIP RE-INVITES?
.

starun · 10-31-2007, 09:23 AM

Couldn't find any option in the admin manual of Sipura. One option was 'REINVITE Expires' was 30 - setting that to 0 does not include 'Expires' in the header. Set that to 0 - still same problem.

Again, even calls to voice mail getting dropped after 30 - 40 seconds now! What could be wrong?

08-03-2007, 03:09 PM	#14
calvin_baank Junior Member Join Date: Jun 2007 Posts: 21 Thanks: 0 Thanked 2 Times in 2 Posts	With x-lite everything works fine.. I dont know what's going on. Possible my PAP2 is not good? Last edited by calvin_baank; 08-03-2007 at 03:14 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Free DID Numbers, Free Voip Calls, & more Voip Info	amroe	Voxalot General	54	01-13-2014 09:11 AM
call forwarding problem	ramsudhir143	Voxalot Support	3	06-23-2007 08:29 PM
Call Quality and Voxalot	shibukraj	Voxalot Support	1	12-01-2006 03:39 AM
What am I doing wrong here?	code-	Voxalot Support	16	10-20-2006 05:12 PM
Newbie - but please be nice	Mallycat	Voxalot Support	21	04-15-2006 07:50 AM

08-02-2007, 02:46 PM	#11
calvin_baank Junior Member Join Date: Jun 2007 Posts: 21 Thanks: 0 Thanked 2 Times in 2 Posts	have same problem again

08-02-2007, 02:58 PM	#12
calvin_baank Junior Member Join Date: Jun 2007 Posts: 21 Thanks: 0 Thanked 2 Times in 2 Posts	when it drops. i just don't get packets anymore... any idea?

08-03-2007, 01:34 PM	#13
calvin_baank Junior Member Join Date: Jun 2007 Posts: 21 Thanks: 0 Thanked 2 Times in 2 Posts	i think this is a blocked port issue. I debug the ATA. and i see that the server still send from port 5060 if though you connect on port 3060 to the server. I don't know if somebody can tell me anything. I'm gettting 408 request time out

08-03-2007, 09:11 PM	#16
bokaroseani Junior Member Join Date: Jul 2007 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	On my Dlink DVG1402S, when I change the SIP server port to 5063 the router does not even register with Voxalot server. So I changed it back to 5060. But I tried changing the user agent port to 5063 and then the router can register with voxalot but it does not help with my call dropping problem around every 5 minutes. I could not find any settings for impedence and all in my router. So did not try that suggestion yet.

08-04-2007, 12:49 PM	#17
bokaroseani Junior Member Join Date: Jul 2007 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	I might just have solved my problem. I made a 12 minute call without disruption. What I did was to change the SIP server port to 4060 instead of 5060 and everything works fine so far. No more calls getting dropped at least in the three over-12minutes calls that I made after making this change in the router config. Might be my internet service provider is cutting the calls after around 5 minutes when using port 5060.

10-15-2007, 01:18 PM	#18
starun Junior Member Join Date: Apr 2007 Posts: 5 Thanks: 1 Thanked 0 Times in 0 Posts	Same problem persists! Whatever ports I change to (2060, 3060, 4060) in my SPA-942, calls drop after 30 secs or less. And yes, with XLite is works all fine. And stun server is stun.xten.com Any suggestions?

10-31-2007, 09:23 AM	#20
starun Junior Member Join Date: Apr 2007 Posts: 5 Thanks: 1 Thanked 0 Times in 0 Posts	Couldn't find any option in the admin manual of Sipura. One option was 'REINVITE Expires' was 30 - setting that to 0 does not include 'Expires' in the header. Set that to 0 - still same problem. Again, even calls to voice mail getting dropped after 30 - 40 seconds now! What could be wrong?