Nokia Support - Page 11

martin · 07-03-2007, 03:59 AM

Quote:

Originally Posted by AlexErko

Martin, please follow the link provided by nokuser and get the appropriately set XML files from Nokia for us to reliably receive incoming calls, then supply them to us.

We looked at this a little while back and our understanding back then was that the XML needed to be provisioned OTA (ie via SMS) or by using a software plug-in installed on the phone.

Unless things have changed then providing you guys with the XML is only half the solution. I would be interested to know if this is still the case ?
.

AlexErko · 07-03-2007, 04:27 AM

Quote:

Originally Posted by martin

We looked at this a little while back and our understanding back then was that the XML needed to be provisioned OTA (ie via SMS) or by using a software plug-in installed on the phone.

Unless things have changed then providing you guys with the XML is only half the solution. I would be interested to know if this is still the case ?
.

I am not sure what method Nokia recommends you use to provide us with the XML for VoIP settings. All I can say is that I have used two methods to place, non-VoIP*, coding onto my phone: SMS and via the Nokia PC Suite.

Have you asked Nokia how to provide us with the VoIP XML?

*Correction: fring provided its settings to me via SMS

AlexErko · 07-05-2007, 03:08 AM

I am aware that the folks at VoXaLot must be very busy, however I would really appreciate an update about receiving settings for reliably receiving calls on my Nokia phone when it is registered with VoXaLot.

If there is a time/cost impediment to resolving this issue, would someone from VoXaLot tell us how much a one-off fee might be for rapidly removing that impediment.

martin · 07-05-2007, 03:18 AM

Hi,

We plan to re-look at this soon. Unfortunately it is a question of time as we are all busy working towards the 16th July release.

It is a priority item for us and we will get to it soon.

We appreciate your patience.
.

AlexErko · 07-05-2007, 03:52 AM

Quote:

Originally Posted by martin

Hi,

We plan to re-look at this soon. Unfortunately it is a question of time as we are all busy working towards the 16th July release.

It is a priority item for us and we will get to it soon.

We appreciate your patience.
.

Fair enough. Good luck with launching the new web site, etc!

AlexErko · 07-10-2007, 01:49 AM

As Martin is busy with other matters for the time being, I have asked Nokia service to send me some changes to the Nokia VoIP client to enable the CRLF keep-alive packets as described in Chapter 6, ‘NAT/FW traversal settings’, in Nokia S60 VoIP Implementation Configuration Tutorial [2] Resource information: Nokia S60 VoIP Implementation Configuration Tutorial v1.1 as that appears to be the solution to the problem of calls not getting through to me, as described in point 2.5.1 of the Nokia S60 VoIP Implementation Troubleshooting Guide http://sw.nokia.com/id/bcbcc0ac-6230...de_v1_0_en.pdf

I have also asked them to send me the changes required to disable all codecs except G.729, in order to save on bandwidth.

Lets see if Nokia can deliver ..........

martin · 07-10-2007, 01:12 PM

I had a play with this tonight with my E61. Using the templates as defined by the 1.7 provisioning spec, I was able to produce the wap-provisioning XML for Voxalot and convert it to WBXML.

As was the problem last time, the WBXML needs to be sent to the phone OTA (over the air).

I will let you know once I complete this last part of the process.
.

nokuser · 07-10-2007, 09:50 PM

Quote:

Originally Posted by martin

I had a play with this tonight with my E61. Using the templates as defined by the 1.7 provisioning spec, I was able to produce the wap-provisioning XML for Voxalot and convert it to WBXML.

As was the problem last time, the WBXML needs to be sent to the phone OTA (over the air).

I will let you know once I complete this last part of the process.
.

Martin, Can you provide us with the wap-provisioning XML for Voxalot? I am sure it is not that difficult to find the way to put it in the phone using OTA.

martin · 07-10-2007, 10:01 PM

Quote:

Originally Posted by nokuser

Martin, Can you provide us with the wap-provisioning XML for Voxalot? I am sure it is not that difficult to find the way to put it in the phone using OTA.

I can by request. The last thing I want to do is publish something that is not 100% complete.

Please PM me if you are interested.
.

AlexErko · 07-10-2007, 10:54 PM

I believe that the Nokia VoIP client is fundamentally the same irrespective of the Nokia model or series of models in which it may be running.

Consequently, I suggest that there be consideration of the modification of the title of this thread from "Nokia eSeries Support" to simply "Nokia Support".

07-05-2007, 03:08 AM	#103
AlexErko Member Join Date: May 2007 Location: Sydney, Australia Posts: 39 Thanks: 6 Thanked 8 Times in 7 Posts	I am aware that the folks at VoXaLot must be very busy, however I would really appreciate an update about receiving settings for reliably receiving calls on my Nokia phone when it is registered with VoXaLot. If there is a time/cost impediment to resolving this issue, would someone from VoXaLot tell us how much a one-off fee might be for rapidly removing that impediment. Last edited by AlexErko; 07-05-2007 at 03:08 AM. Reason: spelling

07-05-2007, 03:18 AM	#104
martin Join Date: Feb 2006 Posts: 2,930 Thanks: 528 Thanked 646 Times in 340 Posts	Hi, We plan to re-look at this soon. Unfortunately it is a question of time as we are all busy working towards the 16th July release. It is a priority item for us and we will get to it soon. We appreciate your patience. . __________________ Martin Please post support questions on the forum. Do not send PMs unless requested.

07-10-2007, 01:12 PM	#107
martin Join Date: Feb 2006 Posts: 2,930 Thanks: 528 Thanked 646 Times in 340 Posts	I had a play with this tonight with my E61. Using the templates as defined by the 1.7 provisioning spec, I was able to produce the wap-provisioning XML for Voxalot and convert it to WBXML. As was the problem last time, the WBXML needs to be sent to the phone OTA (over the air). I will let you know once I complete this last part of the process. . __________________ Martin Please post support questions on the forum. Do not send PMs unless requested.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-10-2007, 01:49 AM	#106
AlexErko Member Join Date: May 2007 Location: Sydney, Australia Posts: 39 Thanks: 6 Thanked 8 Times in 7 Posts	As Martin is busy with other matters for the time being, I have asked Nokia service to send me some changes to the Nokia VoIP client to enable the CRLF keep-alive packets as described in Chapter 6, ‘NAT/FW traversal settings’, in Nokia S60 VoIP Implementation Configuration Tutorial [2] Resource information: Nokia S60 VoIP Implementation Configuration Tutorial v1.1 as that appears to be the solution to the problem of calls not getting through to me, as described in point 2.5.1 of the Nokia S60 VoIP Implementation Troubleshooting Guide http://sw.nokia.com/id/bcbcc0ac-6230...de_v1_0_en.pdf I have also asked them to send me the changes required to disable all codecs except G.729, in order to save on bandwidth. Lets see if Nokia can deliver ..........

07-10-2007, 10:54 PM	#110
AlexErko Member Join Date: May 2007 Location: Sydney, Australia Posts: 39 Thanks: 6 Thanked 8 Times in 7 Posts	I believe that the Nokia VoIP client is fundamentally the same irrespective of the Nokia model or series of models in which it may be running. Consequently, I suggest that there be consideration of the modification of the title of this thread from "Nokia eSeries Support" to simply "Nokia Support".