X-Lite V3 issue - No Outbound voice on Inbound Call

LeonB · 01-18-2009, 01:59 PM

Recently joined Voxalot and installed X-Lite V3.
Everything worked fine (also echo test *600).
However calling (as a test) with any SIP Broker PSTN access number there was a good call setup but the Inbound caller (Via PSTN) could not be replied by voice (X-Lite). He/she didn't hear me speaking, I could hear him/her very well.

My solution (after many hours of frustration

) was quite simple:
Just setup X-Lite as described within Voxalot's softphone instruction.
Also: goto Options --> Advanced --> Audio and just select G711 aLaw and G711 uLaw.
Now comes the nice part, X-Lite has a hidden feature to show more advanced settings and change them...
just dial ***7469 and press DIAL (Green call button)
An advanced grid opens. In the filter box type "honor" and click 'Apply Filter'
The setting 'system:network:honor_first_codec' appears with value 0.
Change this to value 1 and close the window.
A Save option is given. Save this setting, close X-Lite and restart the application.
Test again and hopefully you're happy too...

Many thanks for the one who gave me a good day at the whirlpool.net.au wiki site: Details for configuring X-Lite SoftPhone

emoci · 01-20-2009, 03:31 AM

This may also be of interest http://forum.voxalot.com/voxalot-sup...oice-mail.html

Glad you solved your issue...

01-18-2009, 01:59 PM	#1
LeonB Junior Member Join Date: Jan 2009 Location: The Netherlands Posts: 20 Thanks: 1 Thanked 1 Times in 1 Posts	X-Lite V3 issue - No Outbound voice on Inbound Call Recently joined Voxalot and installed X-Lite V3. Everything worked fine (also echo test 600). However calling (as a test) with any SIP Broker PSTN access number there was a good call setup but the Inbound caller (Via PSTN) could not be replied by voice (X-Lite). He/she didn't hear me speaking, I could hear him/her very well. My solution (after many hours of frustration ) was quite simple: Just setup X-Lite as described within Voxalot's softphone instruction. Also: goto Options --> Advanced --> Audio and just select G711 aLaw and G711 uLaw. Now comes the nice part, X-Lite has a hidden feature to show more advanced settings and change them... just dial **7469 and press DIAL (Green call button) An advanced grid opens. In the filter box type "honor" and click 'Apply Filter' The setting 'system:network:honor_first_codec' appears with value 0. Change this to value 1 and close the window. A Save option is given. Save this setting, close X-Lite and restart the application. Test again and hopefully you're happy too... Many thanks for the one who gave me a good day at the whirlpool.net.au wiki site: Details for configuring X-Lite SoftPhone

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Free DID Numbers, Free Voip Calls, & more Voip Info	amroe	Voxalot General	54	01-13-2014 09:11 AM
HowTo: 6 Steps To Tune Your Voice Quality	martin	Voxalot Tips, Tricks & HowTo's	13	12-27-2010 11:36 AM
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough	ctylor	Voxalot General	5	04-28-2010 12:52 AM
Inbound call not functioning	voxasia	Voxalot Support	4	10-02-2008 02:07 AM
Voice outbound call Droped after 20 sec on 2/3/4060 Ports	kariakala	Voxalot Support	0	10-22-2007 03:57 PM

01-20-2009, 03:31 AM	#2
emoci Join Date: Jul 2007 Location: Toronto, Canada Posts: 1,422 Thanks: 123 Thanked 369 Times in 282 Posts	This may also be of interest http://forum.voxalot.com/voxalot-sup...oice-mail.html Glad you solved your issue...