Dial Plan for Italy wanted!!!

[moonshiner]

Only supported codec list is available on Skypho website, no specifications about calls through Skypho <---> Skypho users:

G711alaw, G711ulaw, G723ar53, G723ar63, G723r53, G723r63, G726r16, G726r24, G726r32, G728, G729br8, G729r8, GSM-EFR, GSM-FR.

I tried to add g723 codec (as you suggest here ) but voxalot doesn't permit to add this codec: only g726

"Invalid Codecs. Please use combination of g729 g726 ilbc gsm ulaw or alaw separated by semi-colons." that's what I get when I use "g729;g723;ilbc;gsm;ulaw;alaw" in codec form, in every combination.

[eliafino]

I have a little solution:
in the number not registered via VoxALot, don't use "voip.eutelia.it" but "195.62.225.244".
In this case, the call arrive correctly!!!

Best regards,
Elia Finotti

[pasqualei]

I wanted to add this dial plan for people that whish to dial a local number without the area code of the city you call the most.

In my example the country code is 0039 for Italy, the area code (081) is the one for Naples and it assumes a seven digit number starting with a 1-9 range number. Since I also dial numbers with 8 digits for the same geographic area, I have added an additional rule with an extra 'X' in the pattern.

here is my dial plan for the 7-digit dialing:

Pattern Replacement Provider Active

_ZXXXXXX 0039081${EXTEN} voipcheap Yes

Let me know

Pasquale

[moonshiner]

Ciao, Pasquale!

Thank you for your dial plan: I tried and it worked great! It seems to me to go back in the past, when there was no need to dial area code for local calls: remember?
Thanks again!

[moonshiner]

Originally Posted by eliafino

I have a little solution:
in the number not registered via VoxALot, don't use "voip.eutelia.it" but "195.62.225.244".
In this case, the call arrive correctly!!!

Best regards,
Elia Finotti

It works, Eliafino, but it doesn't if registered via Voxalot
A little step ahead is done, however
How did you dicover this IP sip proxy instead of eutelia?? Where does it come from??

Thanks.

[pasqualei]

Originally Posted by moonshiner

Ciao, Pasquale!

Thank you for your dial plan: I tried and it worked great! It seems to me to go back in the past, when there was no need to dial area code for local calls: remember?
Thanks again!

Great, I am glad it works!

[nobre84]

open start>run>command , type "nslookup voip.eutelia.it"
it will return the dns matches for the given address

[moonshiner]

Originally Posted by nobre84

open start>run>command , type "nslookup voip.eutelia.it"
it will return the dns matches for the given address

Thanks, nobre84, and sorry my my ignorance

[cashnet]

hi All,
today I have created my first number Skypho… I have recorded it on voxalot but still nothing… Must i wait tomorrow or I have mistaken something in setup? (attach Photo of provider list)

thanks

cashnet

[moonshiner]

If you did as you can see in the attached file, everything goes ok. But you have to wait, maybe, some minutes before it works... Sometimes even 1 hour It's important that you don't register the same account directly with your ATA.