dial plan-block calls to mobiles (engin) - Page 3

emoci · 08-10-2008, 04:46 AM

Quote:

Originally Posted by cncnsw

Nope, just a busy signal. No incoming calls get through either.

Ok do this reset...

1. Pick up the phone and dial ****
2. Dial 877778# to reset
3. Dial 1 to confirm

This should return everything back to the the way it was with Engin...

Once there we can adjust the dialplan...

BTW, do your local calls commonly start with 02 ?

cncnsw · 08-10-2008, 04:49 AM

I do that, it says it was successful, but still a busy signal. And it doesn't reset the SPA config menus.

Yes, that is the area code for the local calls. Don't have to dial 02 (locally) though.

BTW, the "phone" light isn't lit up on the front of the Linskys engin box.

emoci · 08-10-2008, 04:54 AM

Quote:

Originally Posted by cncnsw

I do that, it says it was successful, but still a busy signal. And it doesn't reset the SPA config menus.

Yes, that is the area code for the local calls. Don't have to dial 02 (locally) though.

BTW, the "phone" light isn't lit up on the front of the Linskys engin box.

Do you still have provisioning turned off?

cncnsw · 08-10-2008, 04:58 AM

Quote:

Originally Posted by emoci

Do you still have provisioning turned off?

Turned it back on, no difference.

emoci · 08-10-2008, 05:12 AM

Quote:

Originally Posted by cncnsw

Turned it back on, no difference.

Check PM...

Also power off your SPA and power it back on...

cncnsw · 08-10-2008, 05:16 AM

Quote:

Originally Posted by emoci

Check PM...

Also power off your SPA and power it back on...

Yep, nothing. I must have not changed back one setting somewhere? Maybe under WAN or SIP or something.

emoci · 08-10-2008, 05:20 AM

Quote:

Originally Posted by cncnsw

Yep, nothing. I must have not changed back one setting somewhere? Maybe under WAN or SIP or something.

Check your private messaging in regards to
PacketMan VoIP Knowledgebase / How do I enable remote access on my SPA-3102?

Or try this yourself:
PacketMan VoIP Knowledgebase / How do I update my custom SPA-3102 config file?

cncnsw · 08-10-2008, 05:59 AM

Ok, this thing is going crazy. When I dialed **** 110# it said "0.0.0.0" Now it has a different one, 192.168.0.2 and I can get back into the menu. But when I change the WAN settings to allow remote access, it times out, then won't let me back into the menu for a while. Do you have Logmein?

emoci · 08-10-2008, 06:19 AM

Quote:

Originally Posted by cncnsw

Ok, this thing is going crazy. When I dialed **** 110# it said "0.0.0.0" Now it has a different one, 192.168.0.2 and I can get back into the menu. But when I change the WAN settings to allow remote access, it times out, then won't let me back into the menu for a while. Do you have Logmein?

That's because you changed the port to 8081...so you should be going to 192.168.0.2:8081

I just set up an LogMeIn acct.

VoipAlot · 09-02-2008, 04:46 PM

Would be great if you could just use standard dial plans (i.e. an advanced advanced button).
Rather than the time consuming effort of creating each and every rule, for each VSP....
If you could reference :@gw0 and :@gw1 etc etc. (not in the device, but the VSP's configured)

08-10-2008, 04:49 AM	#22
cncnsw Junior Member Join Date: Aug 2008 Posts: 15 Thanks: 2 Thanked 0 Times in 0 Posts	I do that, it says it was successful, but still a busy signal. And it doesn't reset the SPA config menus. Yes, that is the area code for the local calls. Don't have to dial 02 (locally) though. BTW, the "phone" light isn't lit up on the front of the Linskys engin box. Last edited by cncnsw; 08-10-2008 at 04:52 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Free DID Numbers, Free Voip Calls, & more Voip Info	amroe	Voxalot General	54	01-13-2014 09:11 AM
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough	ctylor	Voxalot General	5	04-28-2010 12:52 AM
Dial plan and various problems	800793	Voxalot Support	6	11-19-2007 01:05 PM
Need a Dial Plan for Toll Free calls?	StanBarber	Voxalot Support	1	05-31-2007 02:09 AM
Dial Plan for Italy wanted!!!	moonshiner	Voxalot Support	32	08-20-2006 10:26 PM

08-10-2008, 05:59 AM	#28
cncnsw Junior Member Join Date: Aug 2008 Posts: 15 Thanks: 2 Thanked 0 Times in 0 Posts	Ok, this thing is going crazy. When I dialed **** 110# it said "0.0.0.0" Now it has a different one, 192.168.0.2 and I can get back into the menu. But when I change the WAN settings to allow remote access, it times out, then won't let me back into the menu for a while. Do you have Logmein?

09-02-2008, 04:46 PM	#30
VoipAlot Member Join Date: Sep 2008 Posts: 33 Thanks: 7 Thanked 5 Times in 1 Posts	Would be great if you could just use standard dial plans (i.e. an advanced advanced button). Rather than the time consuming effort of creating each and every rule, for each VSP.... If you could reference :@gw0 and :@gw1 etc etc. (not in the device, but the VSP's configured)