SIPbroker w. Asterisk DTMF not working

[ineagu]

I m calling into my asterisk server (into a conference for example) thru SIP broker PSTN gateway and the call reaches fine but the DTMF are not sent...
any ideas ?
thank you
ilie neagu

[vk4akp]

I have had the same problem on and off for weeks. It's the gateways. There not working properly. They are also dropping the calls out after the first few seconds.
.-.-.

[vk4akp]

Hi, Can anyone help with this? Is there a fix to get the DTMF working from a SipBroker PSTN Gateway to an Asterisk box?

It used to work fine. Whats changed in the last month or so?

I've tried all sorts of changes to sip.conf but nothing works.

Help please Sipbroker. We need DTMF for the users to select options in our menu's.
.-.-.

[vk4akp]

I've done some more experimenting tonight.

I've noticed that in about 1 in every 4-5 calls Sipbroker negotiates a G.729 call with my Asterisk box. At this point the DTMF signaling works fine.

Every other call is uLaw and DTMF fails with this every time.

I have tried every possible setting for DTMF.

dtmfmode = rfc2833 ; The default setting
dtmfmode = inband
dtmfmode = info
dtmfmode = auto
relaxdtmf = yes

None of these made any difference.

I can only conclude that it's a problem at the SipBroker end?

Can someone give me some idea of whats going on? Or if it is a problem with Sipbroker so I can stop trying to fix it my end and just wait?

Any help appreciated.
.-.-.

[emoci]

Curious, have you tried an alterante access number...

[vk4akp]

Hi, Thanks for getting back to me.

OK. The plot thickens!!! I just tried the Sydney gateway and it failed to pass DTMF also. But I tried a USA Sipbroker gateway and it worked!

I also note that if I call a Asterisk system in the USA that I am involved with from the Brisbane gateway the DTMF works. Yet his system and mine both share the same settings in sip.conf .

The strange thing is that DTMF always used to work and then all of a sudden stopped working. As there had been no changes here I could only assume the problem was elsewhere. (Although I know better never to deal in absolutes when it comes to computers).

Now here's another interesting test. I had friends dial into my box using SIP and also using a USA Gateway I have for the box (IPKall) and that all worked fine also. If I dial out from my ata using VoXaLot and loop back into the Asterisk box once again it works fine.

All very strange. (And annoying) hehe.

The problem seems to only exist from a AU Sipbroker gateway to a AU Asterisk Box. Go figure !! ??? ¿¿¿ :|
.-.-.