|
Voxalot Support Support for the Voxalot service. |
|
Thread Tools | Display Modes |
|
06-03-2008, 04:14 AM | #1 |
Senior Member
Join Date: Mar 2006
Posts: 153
Thanks: 37 Thanked 7 Times in 7 Posts |
SPA1001 Appears to be registering every 1 second
Hi All
I just setup a SPA1001 for a friend and for some reason it appears to be registering every 1 second. The Next Registration In shows only blank, 1 s or 0 s. I have the Register Expires set to 3600, but previously I had it at 600 and 1800 and the ATA still appears to always show the next registration after blank, 0 or 1 sec. -------------------------- Next Registration In: 1 s Register Expires: 3600 -------------------------- Is the Register Expires parameter the field that controls the registration period? Does anyone know how I can fix this problem? Thanks in advance Richard |
06-03-2008, 07:00 AM | #2 |
Senior Member
Join Date: Feb 2007
Location: Indiana, USA
Posts: 166
Thanks: 14 Thanked 22 Times in 19 Posts |
yes, Register Expires parameter the field that controls the registration period. For Voxalot the recommended value is 600 sec.
|
06-03-2008, 11:15 AM | #3 |
Senior Member
Join Date: Mar 2006
Posts: 153
Thanks: 37 Thanked 7 Times in 7 Posts |
Okay, this is weird now. I left it set at 3600 overnight (7 hours) and when I work up this morning, it was doing as it should. Taking 3600 seconds between registratino expire. I then changed the setting back to 600 and now it is expiring every 1 second again.
Not sure what it will show in a few hours. I'll let everyone know. Richard |
06-05-2008, 12:55 PM | #4 |
Senior Member
Join Date: Mar 2006
Posts: 153
Thanks: 37 Thanked 7 Times in 7 Posts |
Okay, so now that I set it to 3600 seconds, it took 2 days (two overnights) before it starting to expire every 3600 seconds. For 2 days it was expiring every 1 sec. Anyhow knows why this unusual behaviour?
|
06-09-2008, 01:49 AM | #5 |
Junior Member
Join Date: May 2008
Location: Netherlands
Posts: 8
Thanks: 1 Thanked 2 Times in 1 Posts |
I had the same problem with my SPA-3102. Whenever I enable the options
- Handle VIA received - Insert VIA received - Handle VIA rport - Insert VIA rport as some posts on the net suggest, I get the exact same behaviour. I did read somewhere this was due to the fact I'm also using a STUN server and that if 'STUN test' was set to yes the 1sec registration issue would go away. Unfortunately that didn't happen, so I just the turned off the above options and enabled "Substitute VIA Addr", "Send Resp To Src Port" and "STUN Enable". That seems to do the trick and works without a hitch. |
06-09-2008, 12:13 PM | #6 |
Senior Member
|
Those are my settings, too, in my PAP2. Working very well.
__________________
ISP: Internode Easy Reach 60: 60GB for AUD60 VSPs: Pennytel and others via SIPSorcery Hardware: Billion 7800VDPX + Siemens Gigaset A580IP and Yealink T22P. |
06-10-2008, 02:29 AM | #7 | |
Senior Member
Join Date: Mar 2006
Posts: 153
Thanks: 37 Thanked 7 Times in 7 Posts |
Ridouan
It worked. The registration seconds now reflect what it should be. Unfortunately, now I have one-way audio, but its a start. This does help me to understand the problem a bit better, so thanks!!! Richard Quote:
Last edited by richard; 06-10-2008 at 02:42 AM. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Voxalot line2 on SPA1001 suddenly dead... | miros | Voxalot Support | 2 | 04-02-2008 11:45 PM |
Problem registering with Billion 7402VGP | nirving | Voxalot Support | 5 | 11-29-2007 10:41 PM |
Anyone experiencing problems registering in eu server? | ricardojpereira | Voxalot Support | 1 | 05-10-2007 07:35 AM |
Second Port not registering? | MarkLL | Voxalot Support | 4 | 09-17-2006 09:58 AM |
Problems registering with Skypho (voip.eutelia.it) | MrFusion | Voxalot Support | 1 | 09-14-2006 08:51 AM |