09-06-2007, 03:07 PM | #1 |
Junior Member
Join Date: Jul 2006
Posts: 7
Thanks: 4 Thanked 0 Times in 0 Posts |
SIPBroker
I have my acanac DID 1-514-1234567 registered with e164.org.
since acanac doesn't have sip uri I registered my DID with voxalot and pointed e164.org to 123456@us.voxalot.com. Tested and all is OK Now when I call SIPBroker and then dial 1-514-1234567 is giving me busy signal. What should I dial after connecting to SIPBroker? |
09-06-2007, 09:22 PM | #2 | |
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts |
Quote:
Is your VoXalot registered somewhere (on an ATA) Try entering *013-15141234567 and see if anything changes |
|
09-06-2007, 10:59 PM | #3 | |
Junior Member
Join Date: Jul 2006
Posts: 7
Thanks: 4 Thanked 0 Times in 0 Posts |
Quote:
but SIPBroker and then 15141234567 AND *013-15141234567 both are busy |
|
09-06-2007, 11:15 PM | #4 |
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts |
Run 15141234567 through this ENum lookup and see if the details on file are correct: SIPBroker - ENUM Lookup
Also check that you can receive calls directly to VoXalot by calling SipBroker then *010123456 (123456 replaced with your VoXalot number) |
09-07-2007, 02:03 AM | #5 | |
Junior Member
Join Date: Jul 2006
Posts: 7
Thanks: 4 Thanked 0 Times in 0 Posts |
Quote:
Results e164.arpa.(16ms) ---Not Found--- e164.org.(80ms) sip:xxx@pbxes.org e164.info.(12ms) ---Not Found--- e164.televolution.net.(82ms) ---Not Found--- enum.org.(105ms) ---Not Found--- but still - busy signals so pbxes.org is busy, but voxalot is working - what did I do wrong |
|
09-07-2007, 02:34 AM | #6 | |
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts |
Quote:
You need to forward to user-extension@pbxes.org and even then, you need to do some set up from within PBXes (which is not very clear to me) Map directly to xxxxxx@voxalot.com, it'll be easier to handle (you can integrate that into PBXes later if you must) |
|
09-07-2007, 02:42 AM | #7 | |
Junior Member
Join Date: Jul 2006
Posts: 7
Thanks: 4 Thanked 0 Times in 0 Posts |
Quote:
xxx is my username - username@pbxes.org so why then the ENUM test from e164.org ring the phone ok? I don't understand why this need to be username-ext@pbxes.org enum trunk setup in PBXes.org enum incomming routing also so do outgoing routing I'm missing something here |
|
09-07-2007, 03:06 AM | #8 | |
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts |
Quote:
Map to xxxxxx@voxalot.com Add that VoXalot account as a Trunk in PBXes (full registration), and then you are set. You can play with routing in PBXes, set it to ring specific extensions etc. Oh, another thing checked at SipBroker SIPBroker - Provider White Pages, pbxes.org seems to not be receiving incoming, but sip.pbxes.com is, so may want to try username@sip.pbxes.com (Personally I recommend the VoXalot solution above though, less headaches) |
|
12-15-2007, 03:27 AM | #9 |
Member
Join Date: Mar 2006
Posts: 90
Thanks: 0 Thanked 2 Times in 2 Posts |
PBXes
PBXes seems somewhat picky about some inbound DIDs, and I assume this applies to SIP inbounds as well.
The best way I have found in PBXes: Make an inbound route that is USERNAME-XXXX where USERNAME is your username on PBXes and XXXX is NOT an extension nor an outbound route, nor trunk this USERNAME-XXX becomes the DNIS of your SIP address such as sip:USERNAME-XXXX@pbxes.org this sip:USERNAME-XXXX@pbxes.org is where you will send your inbounds. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
call connection between VSPs | samjesse | Voxalot General | 6 | 07-25-2007 04:10 AM |
Suggestion: Quick Access to Voicemail via SipBroker | richard | Voxalot Support | 0 | 05-05-2007 02:05 PM |
Access SIPBroker via redirected personal DID | kurun | SIP Broker Support | 3 | 02-25-2007 03:40 PM |
Daft SipBroker question... | ptruman | Voxalot Support | 0 | 10-08-2006 11:57 AM |
SIPME issues... with sipbroker, but not voxalot? | affinity | Voxalot Support | 10 | 05-01-2006 10:52 PM |