View Single Post
Unread 11-29-2007, 05:32 PM   #6
emoci
 
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123
Thanked 369 Times in 282 Posts
emoci is a name known to allemoci is a name known to allemoci is a name known to allemoci is a name known to all
Default

There is one of two problems here:

1. Your ATA is not registering with VoXalot (hence no incoming calls)
2. Your ATA is registered with VoXalot, but it is behind a router which is blocking incoming traffic

Here is a detailed guide on how to set up your SPA http://forum.voxalot.com/voxalot-gen...lkthrough.html


A few highlights from that guide that may help with incoming calls
-Preferably make sure you have STUN set up in your ATA (stun.xten.com has been working for me)

-If you are behind a router that has UPnP, make sure it's active

-This is optional, but it may help to open these port ranges and forward them to your ATA's IP:

5050-5064
5000-5005
16300-16500 (This is a bit hardware/software specific, it may change from one to the next, check within your device it should have a specification of which RTP ports it uses)

Confirming things are working:

Outgoing Calls : Can you reach *600 (Echo Test)
Incoming Calls: Can you reach the ATA via SIPBroker or the EziDial link I gave you above

Quote:
If you enter your VoXalot URI here (like xxxxxx@au.voxalot.com) SIPBroker - EziDial and press dial, does your phone ring and do you hear the ECHO test lady?

Last edited by emoci; 02-18-2008 at 09:39 PM.
emoci is offline   Reply With Quote