RTP packets/Port block/I don't know. Help
Ok everything was working perfect..
Linksys PAP2 firmware 3.1.22(LS)
US.VOXALOT.COM server port 5060
Followed everything in the stickpost.
All worked like a charm.
Now suddenly one day i'm having problems i can't connect to voxalla anymore...
Tried other server everthing... Finally changed the port to 4060.
Thought port 5060 was blocked.
It connects again...
I didn't run any test futher..
Yesterday.
I found a problem. I can't receive voice after a while... RTP packets stop @ 900-950 packets every time...
Well i guessed block port but thats not the case...
because i can send an URI call to my router on port 5060
I was like WTF...
I disabled stun. And i can connect on port 5060..
With stun no matter which one i try or which settings
1)Substitute VIA Addr: Yes
Send Resp To Src Port: Yes
2)Handle VIA received: Yes
Handle VIA rport: Yes
Insert VIA received: Yes
Insert VIA rport: Yes
If i disable STUN and connect on port 5060 to voxalla it works.
But everytime the packets stop at 900-950 You don't hear anything anymore...
I want to know if it my modem or Linksys adaptor or ISP..
I'm going really crazy
Modem(UNPN)+4 port LAN->Linksys I can't do DMZ because i can't access my
modem is locked(password). I can portforward with UPNP to PAP2.
Any advice would help
I enabled logging on my PAP2
Testing:
Stun.xten.com methode 1 stun settings
Port 5060 default
Nothing comes back NO SIP MSG
stun.xten.com methode 1 stun settings
Port Server 4060 Port sip 5060
Connected and working
RPT packets stop/no echo test
Stun.xten.com method 2 stun settings.
Port Server 5060 Port sip 5060
I see there are replies coming from the server byt i get the following sip msg
SIP: MBUF OVFL 3687/2559
Stun.xten.com method 2 stun settings.
Port Server 4060 Port sip 5060
Connected and working
RPT packets stop/no echo test
Call drops after a short time
This is funny the PAP2 reboot before call gets dropped(coouldn't reproduce it)
----
Sipura 1001 firmware:
Stun.xten.com methode 1 stun settings
Port Server 5060 Port sip 5060
Connect
No audio..
No RTP packets send nor received
Stun.xten.com methode 2 stun settings
Port Server 5060 Port sip 5060
Connect
No audio..
No RTP packets received
No RTP packets sent
Stun.xten.com methode 1 stun settings
Port Server 4060 Port sip 4060
Connect
Working again
Reboot the PAP2 doesn't work RTP stop @ 945 packets
WTF
After playing with codecs it works sometime most of the time not.
I THINK IT'S VOXALOT RELATED...
Edit:
I have setup voipbuster on line 1 port 5060. Stun.xten.com..
No problems at all...
Martin Please help
Last edited by calvin_baank; 06-29-2007 at 06:46 PM.
|