View Single Post
Unread 10-01-2009, 07:00 PM   #4
boatman
Senior Member
 
boatman's Avatar
 
Join Date: Jul 2007
Location: Oregon, USA
Posts: 365
Thanks: 17
Thanked 77 Times in 64 Posts
boatman is on a distinguished road
Default

Quote:
Originally Posted by khabibul35 View Post
Why would gizmo get through the ports but not betamax?
I can't be sure without doing some research, but if you have "NAT Mapping Enable" off then it may be something to do with that.

First, set "Symmetric NAT Handling" to 'Yes' in your Voxalot account. Then install the following settings to your ATA and test again. Let us know if problem is resolved or not.

(under SIP tab)
Handle_VIA_received: yes
Handle_VIA_rport: yes
Insert_VIA_received: yes
Insert_VIA_rport: yes
Substitute_VIA_Addr: yes
Send_Resp_To_Src_Port: yes
STUN_Enable: yes
STUN_Test_Enable: yes
STUN_Server: stun.voxalot.com:3478 (or any STUN server such as 'stun01.sipphone.com:3478' or 'stun.sipgate.net:10000')
NAT_Keep_Alive_Intvl: 179 (if your phone does not ring try 119 or 59, use highest number that works)

(under Line_1 and Line_2 (or PSTN_Line) tabs)
NAT_Mapping_Enable: yes
NAT_Keep_Alive_Enable: yes
NAT_Keep_Alive_Msg: 0000
NAT_Keep_Alive_Dest: $PROXY
Register Expires: 3600

----------

Optional settings, steps 1 - 4:
Sometimes its preferable to operate the ATA independently of a STUN server. The benefit is that phone service can continue no matter if the STUN server is working. See steps 1 to 4 below.

1. Forward the SIP ports and the RTP port range from the router to the ATA.
2. Set "STUN Enable:" no
3. Set "NAT Keep Alive Enable:" no
4. The ATA must learn it's public IP address, either through normal SIP registration, or place your public IP address in the 'EXT IP:' field).
boatman is offline   Reply With Quote