Quote:
Originally Posted by tatjam
Thanks for your input, which I am considering. Line 1 (voxalot registration with justvoip as VSP) is set to use port 5060. Line 2 (direct justvoip registration) I set to use port 5061. I do currently have stun.voxalot.com:3478 set as my STUN server. My router (wrt54g flashed with dd-wrt) is not SIP-aware--at least not the firmware version I currently have on it. Anyway, in addition to having the STUN server set on my ATA, I also set port forwarding on my router: it currently forwards port 5060, 5061, 5082, 4569, and 3478 to the ATA. Still thinking . . .
James
|
As far as forwarded ports....also add the RTP range that your ATA uses...in Linksys models you can find this under the SIP Tab I believe...
(The range in my PAP2 and SPA3102 was 16384-16482)
One other thing to try:
In VoXalot:
-Under Member page set Symmetric NAT to No,
Under provider settings (for JustVoip):
-Set Optimize Audio to Yes
-Set your codecs to:
ulaw;alaw;g726;g729;ilbc;gsm
Reboot your ATA after making those changes...