Quote:
|
Originally Posted by affinity
I have setup a 7404VGO now and it, like the 7402VGO that it replaces -- has no problem having voxalot registered to both ports
|
Hi affinity,
Are you able to ring yourself using both lines?
I will explain. If I pick up the phone attached to Line 2 and Dial (via pennytel say) a US DID, which is registered via Voxalot.com.au, Line 1 will ring. Now if I try it the other way around, I get a message saying I'm on the phone. This is not quite what I expected...
It depends on which port has had a "Sync now" performed as to which one works. It may be a hardware issue? and I've done all the obligitory Factory Resets etc. While observing a reboot via the console, the following came up:
Code:
PP Boot 5.01 (15 November 2005)
Copyright (c) 2004 Conexant Systems Ltd.
SDRAM size = 0x2000000
PLL indicates clock speed set to maximum value of 96MHz
Allocatable memory starts @ 0x71b100, end @ 0x2000000
No, or invalid, configuration information in EEPROM - trying FLASH
Valid configuration (size 256)
DSL gateway version 5.07 (04 July 2006)
I've highlighted the line. Maybe this is normal? It hasn't quite been the same since it got hung up on a pstn line and rebooted itself
.
Cheers,
Mark