View Single Post
Unread 07-25-2008, 06:21 AM   #3
mschmarck
Junior Member
 
Join Date: Jul 2008
Posts: 7
Thanks: 3
Thanked 0 Times in 0 Posts
mschmarck is on a distinguished road
Red face No luck...

Hello!

Quote:
Originally Posted by emoci View Post
First just to summarize, correct anything that's wrong:

1. You can call *600
2. You can call *500
3. Incoming calls are working fine?
4. When you place a call with dus.net, you do not hear it ringing on the line, your cellphone rings, but you do not have 2 way audio
5. When you call via SipCall.ch, you do not hear it ringing, but you have 2 way audio when you pickup
4 is not correct. At least not always. When I call my mobile, I do not hear it ringing and my cellphone rings (that's correct), but I DO have 2 way audio.

When I call some other number (like the German "test" numbers I mentioned), I hear nothing at all.

There's no difference in behaviour between dus.net and sipcall.ch.

Quote:
1. When setting up dus.net and SipCall.ch in VoXalot enter the following under the codec field:
ulaw;alaw;g726;g729;ilbc;gsm
I had it set to "g726;alaw;ulaw", because those are the codecs that the C450IP supports and it's the order that I have set in the C450IP's preferences.

Quote:
2. Set up a Stun server in your device if you can (eg. stun.xten.com)
Tried it with and without. My device is in my local "LAN". I used stunserver.org:3487.

Quote:
3. There are two settings when logged into VoXalot...
The first is NAT Symmetric Handling (under member details)
The second is Optimize Audio (last field when setting up a provider)
I already tried every possible combination. Didn't change anything.

Quote:
4. Make sure you are using
us.voxalot.com
or
eu.voxalot.com
or
au.voxalot.com
to register, and that the server you are registering to, matches your selected cluster (under member details, when logged in)
I used eu.voxalot.com, as I'm in Switzerland.

What else can be done?

Thanks a lot,
Michael
mschmarck is offline   Reply With Quote