Voxalot / SIP Broker Support Forums - View Single Post

belchie · 03-24-2007, 12:49 PM

Somethings gone wrong with my dial plan. Can anyone please help.

Here's the plan: (everything is registered and active)

1 _0044207xxxxxxx ${EXTEN} sipgate
2 _00441. ${EXTEN} poivy
3 _00355. ${EXTEN} poivy
4 _00447. ${EXTEN} Pennytel
5 _2. ${EXTEN:1} Pennytel

1) Dialing out to a Sipgate DDI = nothing
2 & 3) Usual betamax problems so not concerned
4) Routing UK mobile numbers via Pennytel = "You have used all your credit" even though the account has credit
5) Manual routing via Pennytel = OK for landlines but for mobiles, I get the above message again.

I've checked both the Sipgate and Pennytel accounts and look the same as when they worked previously - nothing has changed.

Could it be my dialling plan or codec selection that's causing the problem?

I'm using a Grandstream Budgetone 100 with the following codecs selectd in the configuration menu: PCMA, PCMU, g729, g729-32, iLBC, g722, g723, g723.1

Ports 5004, 5060-5070 and 8000-35000 are forwarded to the phone.

Can anyone please help?

03-24-2007, 12:49 PM	#1
belchie Junior Member Join Date: Nov 2006 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Dial Plan Problem Somethings gone wrong with my dial plan. Can anyone please help. Here's the plan: (everything is registered and active) 1 _0044207xxxxxxx ${EXTEN} sipgate 2 _00441. ${EXTEN} poivy 3 _00355. ${EXTEN} poivy 4 _00447. ${EXTEN} Pennytel 5 _2. ${EXTEN:1} Pennytel 1) Dialing out to a Sipgate DDI = nothing 2 & 3) Usual betamax problems so not concerned 4) Routing UK mobile numbers via Pennytel = "You have used all your credit" even though the account has credit 5) Manual routing via Pennytel = OK for landlines but for mobiles, I get the above message again. I've checked both the Sipgate and Pennytel accounts and look the same as when they worked previously - nothing has changed. Could it be my dialling plan or codec selection that's causing the problem? I'm using a Grandstream Budgetone 100 with the following codecs selectd in the configuration menu: PCMA, PCMU, g729, g729-32, iLBC, g722, g723, g723.1 Ports 5004, 5060-5070 and 8000-35000 are forwarded to the phone. Can anyone please help?