Voxalot / SIP Broker Support Forums - View Single Post - Linksys WIP300 not receiving calls from sipbroker

f.soto · 10-06-2007, 01:16 AM

Well, it turned out to be a little bit more tricky.

My Belkin router was dropping the connection from its table after some 'not configurable' period of time.
So, I set the SIP registration time on the phone to 85 seconds. This increases the load on the server, but guaranties that the port will be kept open in the router and so the phone will receive the calls.

I also fixed the IP address on the phone and disabled the STUN.

It is working properly now, except for a bug in the phone firmware (1.00.09) that sometimes hangs when the phone is registering on the SIP server. But I noticed that disabling the phone screen saver reduces significantly the frequency of this problem.

Best Regards,
Fernando

10-06-2007, 01:16 AM	#3
f.soto Junior Member Join Date: Sep 2007 Posts: 5 Thanks: 0 Thanked 1 Times in 1 Posts	Well, it turned out to be a little bit more tricky. My Belkin router was dropping the connection from its table after some 'not configurable' period of time. So, I set the SIP registration time on the phone to 85 seconds. This increases the load on the server, but guaranties that the port will be kept open in the router and so the phone will receive the calls. I also fixed the IP address on the phone and disabled the STUN. It is working properly now, except for a bug in the phone firmware (1.00.09) that sometimes hangs when the phone is registering on the SIP server. But I noticed that disabling the phone screen saver reduces significantly the frequency of this problem. Best Regards, Fernando