Quote:
Originally Posted by BigTex
Here is the configuration information from ICall (I've replaced my registration information) for configuring Asterix.
[icall]
type=friend
host=carriers.icall.net
context=icall_in
username=cust_MYLOGIN
secret=MYPASSWORD
disallow=all
allow=ulaw
allow=alaw
allow=gsm
insecure=very
canreinvite=no
qualify=no
|
The bolded part bothers me a bit....Martin can explain this properly, but my limited understanding is that VoXalot makes use of ReInvites to establish the incoming connection
Now is that what iCall asked for though (if that's the case this could be an issue), or is it just the default setting that was on Asterisk when you set it up (in this case we're back to square zero)
Check these:
In Member Details in VoXalot make sure Symmetric NAT is set to YES
In the VSP setup in VoXalot make sure Optimize Audio is set to No
See if there is a difference......
Also just to rule things out, can you receive calls directly to VoXalot or via another registered VSP:
-Either try calling SipBroker PSTN number then *010123456
-Or use
SIPBroker - EziDial and enter your VoXalot SIP URI to see if the call comes in
-Or do you have any other providers that ring VoXalot successfully (I see callcentric mentioned, this has worked for incoming right)