ATA dialing plan
Sorry, I'm new to the terminalogy. Here are my VoIP settings on the NB9W. I've read through the manual and online setup, and it doesn't let me specify dialing plans, just VoIP provider. While it says it can handle 2 VoIP phone numbers, they must be with the same VoIP provider, and and are treated as just seperate 'extensions'. I had to hunt around on the netcomm website to determine that I could access my landline via '##'.
In case my voxalot dial plans help, I've appended them below as well.
_______________________________
Interface name: br0 - Bridge
Local selection: AUS - Australia
Preferred codec: G729
Use SIP Proxy: (ticked)
SIP Proxy: voxalot.com
SIP Proxy port: 5060
SIP Proxy Domain: voxalot.com
Register Expire Time: 3600
1. DispName: XXXXXX, VoIP Phone Number: XXXXXX, Auth. ID: XXXXXX, Auth. Password: YYYYYY
2. DispName: <blank>, VoIP Phone Number: <blank>, Auth. ID: <blank>, Auth. Password: <blank>
(XXXXX - my voxalot login.)
Max Digits: 24
RFC2833 Outband DTMF: Auto Negotiation
RTG Payload Type for RFC2833: 101
Emergency calls: Landline, Number: 000
Enable Internal Call: <not ticked>
___________________________
Dial plans in priority order:
Priority Pattern Replacement Provider Active
9 _13450345 61${EXTEN} Freecall true
10 _NXXXXXXX 02${EXTEN} Freecall true
20 _0[235-9]XXXXXXXX ${EXTEN} Freecall true
30 _1[38]00XXXXXX ${EXTEN} Freecall true
40 _04XXXXXXXX ${EXTEN} Freecall true
50 _0011. ${EXTEN} Freecall true
51 _0018. ${EXTEN} Freecall true
60 _XXX. ${EXTEN} Freecall true
|