Voxalot / SIP Broker Support Forums - View Single Post

Rico74 · 10-27-2006, 06:04 AM

After regretable and undue intemperance on my part, and more importantly a new Voxalot framework release - iiNet registration now works in a stable fashion.

As part of my penance, I humbly submit my settings.

Member Details
Preferred Server (for SIP registrations): voxalot.com.au

Provider List
Description: iiNet
Username: {your 10 digit VoIP number}
Password: {VoIP password} <-- NOTE: This is not your internet access password.
Codecs: alaw;ulaw;g729
Host: 203.55.231.194
Port: 5060
Active: Yes
SIP Register: Yes

Now, contrary to popular opinion, the iiNet supplied wireless VoIP router (the attractively named Belkin F1PI241EGau) can work with Voxalot!
It is not "locked", but if at any time you modify the settings on the "Setup Wizard" page (apart from clicking the "Register" and "Unregister" buttons) it will auto-configure back to the default iiNet settings instead of the Voxalot settings. All settings must only be modified on the "VoIP" page.

Below are the settings I use. I know some of them might be "completely nuts" - but hey, they work for me!

Port Setting - Phone 1
Phone Number: {your 6 digit Voxalot number}
Display Name: {your 6 digit Voxalot number}
SIP Domain: voxalot.com.au
Sip Server: voxalot.com.au
Username: {your 6 digit Voxalot number}
Password: {your Voxalot password}

SIP Setting - SIP Parameters
SIP Listen Port: 5060
Proxy IP: voxalot.com.au
Proxy Port: 5060
Registrar IP: voxalot.com.au
Registrar Port: 5060
Re-Registration Time Interval: 1800

VOIP Advanced Setting
Support Call Waiting: Yes
Caller-ID Presentation: Yes
Support User-Agent Header: Yes
Support Out of Band DTMF: No
Special Dial tone for VOIP call: No
Use strict routing for nonstandard SIP server: No
Start RTP session before receiving ACK: No
Use SRV option for SIP registration: Yes
Use SIP ALG option: No
Call Hold Version: RFC3264
Telephony Hook Flash Timer: 50ms ~ 250ms
Telephony Tone Country Setting: Australia
Codec Rate(G723, G729, G711): 4 times with sample rate
Voice Codec Configuration: G.711 A law, G.711 U law, G.729, G.723.1

Port Advanced Setting - Phone 1
Volume Gain Control: Fixed (Input=4 / Output=-14)
Jitter Buffer Mode: Fixed
Jitter Buffer Delay (ms): 40
Echo Canceller Delay: 32ms
VAD: No
CNG: No
PLC: Yes
Caller ID Mode: No
Inter Digit Delay: 4 Sec.
Additional Ringing Mode: Yes
T.38 Mode: Yes

I hope this helps other attempting to use iiNet with Voxalot.

Thanks to Martin and the rest of the Voxalot team for a wonderful service.

Cheers,
Rico74.

10-27-2006, 06:04 AM	#6
Rico74 Junior Member Join Date: Oct 2006 Location: Canberra, Australia Posts: 9 Thanks: 1 Thanked 0 Times in 0 Posts	Apology, solution and penance. After regretable and undue intemperance on my part, and more importantly a new Voxalot framework release - iiNet registration now works in a stable fashion. As part of my penance, I humbly submit my settings. Member Details Preferred Server (for SIP registrations): voxalot.com.au Provider List Description: iiNet Username: {your 10 digit VoIP number} Password: {VoIP password} <-- NOTE: This is not your internet access password. Codecs: alaw;ulaw;g729 Host: 203.55.231.194 Port: 5060 Active: Yes SIP Register: Yes Now, contrary to popular opinion, the iiNet supplied wireless VoIP router (the attractively named Belkin F1PI241EGau) can work with Voxalot! It is not "locked", but if at any time you modify the settings on the "Setup Wizard" page (apart from clicking the "Register" and "Unregister" buttons) it will auto-configure back to the default iiNet settings instead of the Voxalot settings. All settings must only be modified on the "VoIP" page. Below are the settings I use. I know some of them might be "completely nuts" - but hey, they work for me! Port Setting - Phone 1 Phone Number: {your 6 digit Voxalot number} Display Name: {your 6 digit Voxalot number} SIP Domain: voxalot.com.au Sip Server: voxalot.com.au Username: {your 6 digit Voxalot number} Password: {your Voxalot password} SIP Setting - SIP Parameters SIP Listen Port: 5060 Proxy IP: voxalot.com.au Proxy Port: 5060 Registrar IP: voxalot.com.au Registrar Port: 5060 Re-Registration Time Interval: 1800 VOIP Advanced Setting Support Call Waiting: Yes Caller-ID Presentation: Yes Support User-Agent Header: Yes Support Out of Band DTMF: No Special Dial tone for VOIP call: No Use strict routing for nonstandard SIP server: No Start RTP session before receiving ACK: No Use SRV option for SIP registration: Yes Use SIP ALG option: No Call Hold Version: RFC3264 Telephony Hook Flash Timer: 50ms ~ 250ms Telephony Tone Country Setting: Australia Codec Rate(G723, G729, G711): 4 times with sample rate Voice Codec Configuration: G.711 A law, G.711 U law, G.729, G.723.1 Port Advanced Setting - Phone 1 Volume Gain Control: Fixed (Input=4 / Output=-14) Jitter Buffer Mode: Fixed Jitter Buffer Delay (ms): 40 Echo Canceller Delay: 32ms VAD: No CNG: No PLC: Yes Caller ID Mode: No Inter Digit Delay: 4 Sec. Additional Ringing Mode: Yes T.38 Mode: Yes I hope this helps other attempting to use iiNet with Voxalot. Thanks to Martin and the rest of the Voxalot team for a wonderful service. Cheers, Rico74.